PVC Kitchen Cabinets in Pakistan: Waterproof Boards, Thickness and Limits
PVC kitchen cabinets are built from PVC foam board or sheet, which does not absorb water, swell or feed termites, and that makes them popular for wet kitchens, humid cities and rented homes. They are lighter and cheaper than many alternatives, but quality varies with board thickness and density, and they need good hardware and support. This guide covers the boards, finishes, strengths, limits and the checks to make before you order. For the board itself, see PVC foam board.
Why PVC suits wet kitchens
Water is the main enemy of kitchen cabinets. PVC board does not absorb it, so base units near the sink do not swell or peel at the edges, and termites have nothing to eat. It also resists steam and cleans easily, which is why it is a common choice in damp climates and for rentals.
Boards, thickness and density
Cabinet PVC is usually foam board of different densities and thicknesses. Denser, thicker boards hold screws and hinges better and flex less under load. Ask for the density and thickness in writing and measure it.
| Check | Why it matters |
|---|---|
| Board thickness | Strength and screw hold |
| Density | Rigidity, weight capacity |
| Edge finish | Sealed, smooth edges look better and last |
| Brand and batch | Consistent colour and quality |
Board detail: PVC sheets.
Finishes and looks
PVC cabinets come plain white, in wood-look laminates and in printed or foil finishes. Check how the finish is bonded, since peeling is the most common complaint. Matte and textured finishes hide marks better than gloss.
Strengths
- Waterproof: safe near sinks and in humid homes.
- Termite-proof: no pest damage.
- Light: easier to transport and fit.
- Low upkeep: wipe clean.
Limits to know
PVC is less rigid than board, so long spans need support and heavy items need good hardware. It can mark or soften under high direct heat, so keep it away from the hob and heat sources. It also offers fewer premium looks. Compare with MDF kitchen cabinets and aluminium kitchen cabinets.
Hardware and fitting
Use quality hinges and drawer channels rated for the load, and add supports for wide shelves. Seal gaps near the sink and keep the base off a wet floor. For cost planning see the kitchen cost calculator.
Is PVC right for your kitchen
PVC is a strong choice for wet kitchens, humid homes and rentals, especially for base units. For a premium look or heavy daily use, board or aluminium may suit better. Many homes mix PVC base units with board wall units.
How we quote
Send the room size, a sketch or photo and the finish you like. We confirm what we can supply and reply with a written rate that lists every item. Before you order, confirm the exact size or model, ask for the specification and warranty in writing, and compare totals including fitting and delivery rather than the item price alone. To get a close first estimate, clear the area, mark sockets, switches and pipe positions, note the ceiling height and photograph the space from two corners.
| Item | Unit | Scope | Supply | Rate |
|---|---|---|---|---|
| PVC kitchen cabinets, by board and finish | Per sq ft of face | Material and hardware, fitting quoted separately | Supply across Pakistan | PVC shutters PKR 1,000 – 1,600 per sq ft of front |
| Hardware, drawers and fitting | As needed | Material and hardware, fitting quoted separately | Supply across Pakistan | Hinges PKR 500 – 1,700; drawer channels PKR 2,100 – 7,500; handles PKR 250 – 900 |
Frequently Asked Questions
They are good for wet and humid kitchens, because PVC does not absorb water, swell or attract termites, and it wipes clean. They are lighter than board and cost-effective. Quality varies with board thickness and density, so check these, and use good hardware.
The board itself is waterproof, so it will not swell like MDF if water reaches it. Joints, edges and hardware still need good fitting and sealing. Water should not stand around the base, and the finish should be well bonded. Check the warranty terms and who honours them before you pay.
They should be kept away from direct heat. High temperatures can soften or mark PVC, so use a heat guard beside the hob and avoid placing PVC panels near open flames. A metal strip or a tiled splashback near the hob protects the cabinets.
Thicker, denser boards hold screws and hinges better and flex less, so ask for the thickness and density in writing and measure it on delivery. Carcass boards are commonly thicker than shelves or back panels. Wide shelves need support.
PVC resists water and termites and suits wet areas, while MDF offers more finishes and a firmer feel but swells if water reaches the core. Many homes use PVC or moisture-resistant boards near the sink and laminated MDF elsewhere to balance cost and performance.
Send the room size, a photo or sketch and the finish you prefer on WhatsApp. We confirm what we can supply and reply with a written rate that lists the boards, hardware and fittings, so you can compare quotes from different suppliers on the same scope.
More Kitchen Cabinets Pages
Considering PVC cabinets?
Send the room size and a photo. We reply with a written rate.