How to measure your wall area
Measure the height and width of each wall you want to panel and multiply them, then add the walls together. For a feature wall, that is usually one wall — height times width. For a full room, measure all four walls and subtract large openings like windows and doors. Panels are sold and fitted by the square foot, so this area is all the calculator needs. If you are unsure, measure generously; it is better to order a little extra than to run short mid-job.
What the rate includes, and what drives it
The per-square-foot figure covers the panel itself plus adhesive, trims and fitting. What moves it is mainly the panel type and finish — plain PVC sits at the lower end, while marble-effect, fluted and premium textured panels cost more. Wall condition matters too: a sound, flat wall fits quickly, while an uneven wall may need preparation. Standard 2026 rates run roughly PKR 150–630 per square foot supplied and fitted; the quality toggle moves the estimate across that band.
Ordering and next steps
Add around 5–10% to your measured area for cuts and wastage, especially on patterned panels where you match the design across joints. Once you have a figure you are happy with, send it to us on WhatsApp for a firm quote and current stock — we carry a wide range of PVC wall panels and deliver nationwide. Browse the full range to pick a finish, then come back and price it here.