Extension Board Price in Pakistan: 4 and 6 Way Types, Surge Protection, Cable and Fuse Ratings and Safe Use
Extension board price in Pakistan runs from about PKR 350 for a basic multi-socket lead to over PKR 4,000 for a branded 6 way board with surge protection and a heavy cable. An extension board, also called an extension lead or cord, gives you more sockets from one wall point, but a weak one is a common cause of heat and fire at home. This page explains the types, what the cable and fuse rating mean, indicative rates and how to use one safely. For fixed sockets, see electric sockets and plugs and sockets.
What to look for
A good extension board has a thick cable, a proper plug with a fuse, solid brass contacts inside the sockets and a body made of flame-retardant plastic. A thin cable and a loose socket give heat, so they matter more than the number of sockets.
Extension board price in Pakistan
Rates depend on the number of sockets, the cable, the brand and extras like surge protection and USB. These ranges are indicative.
| Item | Indicative range |
|---|---|
| Basic multi-socket extension lead | PKR 350 - 800 |
| 4 way extension board, local brand | PKR 900 - 1,500 |
| 4 way extension board, branded | PKR 2,500 - 2,700 |
| 6 way extension board, local brand | PKR 1,500 - 3,000 |
| 6 way extension board, branded | PKR 4,300 - 4,400 |
| Surge-protected board | PKR 1,500 - 5,000 |
Prices move with brand, model, size and stock. Use these ranges to judge a quote, then compare the exact model and what is included.
Cable size and load rating
The label shows the maximum current, often 10 or 13 A, and the total watts the board can handle at 220 V. Add up the appliances you plan to connect. A 13 A board handles roughly 2,800 watts, but a heater, an iron or an air conditioner should have its own wall socket, not an extension board.
Surge protection and USB
A surge-protected one absorbs voltage spikes that can damage TVs, routers and computers. Voltage swings are common in Pakistan, so this extra pays for itself for sensitive electronics. USB ports charge phones without adaptors, though a cheap USB module may run warm.
How to use one safely
- No daisy-chaining. Never plug one board into another.
- Match the load. Keep total watts under the board's rating.
- Uncoil the cable. A coiled cable under load heats up.
- Keep it dry and open. Do not cover it with a rug or a cloth.
- Replace damaged boards. Never tape a cracked body or a frayed cable.
Which appliances should not be on a board
Heavy loads such as air conditioners, geysers, irons, heaters and ovens should go straight into a properly rated wall socket. Fridges and freezers also like a solid socket. Use a board for TVs, chargers, lamps, fans and computers.
Fixed sockets versus power boards
If you use extension boards all the time, you need more wall sockets. A licensed electrician can add points from the distribution board on a protected circuit, with an RCCB for shock safety. Fixed wiring should be done by a licensed electrician. See switches and sockets for fixed options.
Choosing a brand
Choose a brand that prints its ratings clearly and shows a proper safety marking, and avoid unmarked boards. Our switch and socket brands guide compares the common makers. A heavier board usually has better copper inside.
Frequently Asked Questions
A basic multi-socket lead costs about PKR 350 to 800, a 4 way board about PKR 900 to 2,700 and a 6 way board about PKR 1,500 to 4,400. Surge-protected boards cost about PKR 1,500 to 5,000, depending on brand and cable thickness.
Most boards are rated 10 or 13 A, which is roughly 2,200 to 2,800 watts at 220 V. Check the label, add up your appliances and stay below the rating. Heavy appliances like heaters and air conditioners should use a wall socket.
Yes, for TVs, routers and computers. Voltage spikes are common and can damage electronics. A surge-protected board absorbs them. Check that the protection is real, with a rating printed on the label, not just an indicator light. It is a small extra cost compared with a damaged television.
No. An air conditioner draws a heavy current and should be wired to a properly rated socket or a dedicated line with its own breaker. An extension board can overheat and start a fire under that load. Ask an electrician for a dedicated socket if there is none near the unit.
Heat means overload, a loose contact or a thin cable. Unplug the load, check the total watts and replace the board if the plug or sockets are loose. A board that gets hot again should be thrown away. Never keep using a board that smells of burning plastic.
Send the number of ways, the length and the features you want on WhatsApp. We confirm what we can supply and reply with a written rate that lists the brand, cable rating and warranty, so you can compare quotes from different sellers on the same scope.
Need a safe extension board?
Send the room size, the item and a photo. We reply with a written rate.