Distribution Board Price in Pakistan: DB Box Ways, Plastic and Metal, Flush and Surface, IP Rating and Layout
Distribution board price in Pakistan runs from about PKR 540 for a small 4 way plastic DB box to PKR 2,800 or more for 8 to 10 ways, with weatherproof and metal types costing more. A distribution board, also called a DB box or panel box, is the enclosure that holds the breakers, the RCCB and the busbar for a house, a shop or a workshop. This page explains the types, how many ways you need, indicative rates and how to plan a layout. Panel work should be done by a licensed electrician. See MCB breakers and RCCB breakers for what goes inside.
What a distribution board does
A distribution board receives the supply, splits it into separate circuits and protects each one with a breaker. It keeps the wiring tidy, makes isolation safe and holds the earth and neutral bars. A well-planned board lets you switch off one room without losing the whole house.
How many ways do you need
A way is a slot for one breaker. Count your circuits: lights per floor, sockets per area, air conditioners, geysers, a kitchen line and a pump. Then add the RCCB and spare ways for later. A small flat may use 4 to 8 ways, an average house 10 to 16 and a large house or shop more than that.
Distribution board price in Pakistan
Rates depend on the ways, the material, the protection class and the brand. These ranges are indicative.
| Item | Indicative range |
|---|---|
| Plastic DB box, 4 way, surface | PKR 540 - 600 |
| Plastic DB box, 2 plus 8 ways | PKR 430 - 480 |
| Plastic DB box, 8 to 10 ways | PKR 2,780 - 4,330 |
| Weatherproof IP66 box, 4 to 8 ways | PKR 2,535 - 2,790 |
| Plastic DB box, 12 to 14 ways | PKR 4,500 - 8,000 |
| Metal DB panel, 12 to 24 ways | PKR 8,000 - 30,000 |
Prices move with brand, model, size and stock. Use these ranges to judge a quote, then compare the exact model and what is included.
Plastic or metal
Plastic boards are light, cheap and do not corrode, and they suit homes. Metal boards are stronger, handle heat better and suit shops and workshops. Choose a flame-retardant plastic or a powder-coated metal, and avoid thin, brittle bodies.
Flush or surface mount
A flush board is built into the wall for a clean look and is planned before plaster. A surface board is screwed on the wall and suits a retrofit. Leave clear space in front of the board and keep it reachable, not behind a wardrobe.
Weather and dust protection
The IP rating shows protection against dust and water. An IP66 box suits outdoor and solar use. Indoor boards in dry rooms need less. For a pump room or a lawn, choose a weatherproof box, and add an RCCB for shock protection.
Planning a home board layout
Group circuits by area, label each way and keep heavy loads on their own breakers. Fit an RCCB for the socket circuits, a main switch and spare ways. Keep wires neat and colour-coded, and leave a printed circuit list inside the door. For fans and lights, see ceiling fans and lighting.
Safety
Panel work should be done by a licensed electrician. Use the correct cable size for each breaker, tighten all terminals and fit a cover on every unused way. Keep the board dry and out of reach of children. Never add a breaker bigger than the cable can carry.
Frequently Asked Questions
A small 4 way plastic DB box costs about PKR 540 to 600, an 8 to 10 way box about PKR 2,780 to 4,330 and a weatherproof IP66 box about PKR 2,535 to 2,790. Larger and metal boards cost more, depending on ways and brand.
A DB box is a distribution board, the enclosure that holds breakers, the RCCB and the busbars for a house or shop. It receives the supply and splits it into protected circuits, so a fault on one circuit does not take everything off.
Count the circuits you have and add spare ways. A small flat may need 4 to 8 ways, an average house 10 to 16 and a large house or shop more. A licensed electrician should plan the layout from the load.
Plastic boards are cheap, light and do not rust, and they suit homes. Metal boards are stronger and handle heat better, so they suit shops and workshops. Pick flame-retardant plastic or powder-coated metal in either case. A metal board also gives better fire resistance, which matters for a shop or a workshop with a heavy load.
Panel work should be done by a licensed electrician. The board connects to the main supply, and wrong connections can cause shock or fire. An electrician also matches breakers to wire sizes and fits the earth and neutral bars correctly.
Send the number of ways, the material and the place of use on WhatsApp. We confirm what we can supply and reply with a written rate that lists the box, breakers and warranty, so you can compare quotes from different sellers on the same scope.
Planning a new board?
Send the room size, the item and a photo. We reply with a written rate.