Ceiling Fan Watts in Pakistan: A Wattage Chart by Size and Motor Type, Plain AC, AC DC and BLDC Fans and How to Read the Label
Ceiling fan watts in Pakistan range from about 25 watts for a modern brushless fan to over 100 watts for an old plain fan, and the figure on the label is the quickest way to compare running costs. This page is a reference chart: it lists typical watts by size and motor type, explains why older fans use more power, shows how to read the label and links to the pages that explain the sums. For the full guide see the size and wattage guide.
Wattage chart by type
These typical figures are at high speed. Always check the label of the fan you are buying.
| Fan | Typical watts |
|---|---|
| 36 inch plain AC fan | About 50 - 60 W |
| 48 inch plain AC fan | About 60 - 75 W |
| 56 inch plain AC fan | About 70 - 90 W |
| 56 inch AC DC or inverter fan | About 28 - 35 W |
| Small 12 W DC fan | About 12 W |
| Old 56 inch fan, worn motor | About 90 - 110 W |
Prices move with brand, model, size and stock. Use these ranges to judge a quote, then compare the exact model and what is included.

Why watts differ between fans
A plain fan uses a simple capacitor motor, which wastes power as heat. A brushless motor with an electronic controller is much more efficient. Wider blades and good bearings also cut the load. An old fan with worn bearings and a tired winding draws more watts for less air.
How to read the label
The label on the motor or the box shows the voltage, usually 220 to 240 V, the frequency, usually 50 Hz, and the power in watts. Some labels also show the speed in revolutions per minute and the airflow. Use the watts figure at the highest speed to compare. A photo of the label should be kept with the invoice.

Watts and the electricity bill
Multiply watts by hours and divide by 1,000 to get units. A 75 watt fan used 10 hours uses 0.75 units a day. A 30 watt fan uses 0.3 units. See ceiling fan power consumption and electricity consumption for worked examples.
Normal fan wattage
Many people ask what a normal fan uses. The honest answer is 60 to 90 watts for a plain 48 to 56 inch fan. See normal ceiling fan watt for how age and speed change this figure.
Replacing an old fan
An old 100 watt fan replaced by a 30 watt inverter fan saves about 70 watts. Over ten hours a day that is 0.7 units, or about 21 units a month per fan. See 30 watt fan prices and the inverter fan guide.
Watts and wiring
Total the watts of all fans on a circuit and keep within the breaker and wire rating. A circuit with eight plain fans can draw 600 watts or more. Use an MCB sized to the wire. Fixed wiring should be done by a licensed electrician.
Common mistakes
- Comparing at different speeds. Use high speed.
- Trusting the box claim. Read the label on the fan.
- Ignoring age. Old fans use more.
- Mixing volts and watts. They are different figures.
Indicative ceiling fan rates
These are indicative market ranges in Pakistani rupees, not a fixed quote. Exact rates depend on brand, size, quality and quantity, so compare at least two quotations on the same specification.
| Item | Indicative range |
|---|---|
| Standard AC ceiling fan, 56 inch | PKR 8,500 - 16,000 |
| Premium or decorative fan | PKR 16,000 - 21,000 |
| BLDC or DC energy-saver fan | PKR 8,000 - 25,000 |
| Exhaust fan | PKR 2,500 - 9,000 |
| Installation, per fan | PKR 500 - 1,500 |
Frequently Asked Questions
A plain 56 inch AC fan uses about 70 to 90 watts, a 48 inch about 60 to 75 watts and a 36 inch about 50 to 60 watts. An AC DC or inverter 56 inch fan uses about 28 to 35 watts.
Worn bearings and a tired winding make the motor work harder. An old 56 inch fan can draw 90 to 110 watts for less air than a new fan, so replacing it can save power. Check the warranty terms and who honours them before you pay.
On the label on the motor or the box, with the voltage and frequency. Use the watts at the highest speed to compare fans. Keep a photo of the label with the invoice. Measure carefully and confirm sizes with the seller before ordering.
A good inverter fan can deliver similar airflow at about 30 watts, thanks to a brushless motor and controller. Quality varies, so test the fan in the shop. Rates and stock change, so confirm the current position before you commit. If you are unsure, send a photo and the measurements and we will advise.
Multiply watts by hours of use and divide by 1,000. A 75 watt fan used for ten hours uses 0.75 units. A 30 watt fan used the same time uses 0.3 units. If you are unsure, send a photo and the measurements and we will advise.
Usually the same working day once you send the quantity, the size or rating and a photo. The reply is a written rate with the model, warranty and delivery listed, so you can compare it against other quotes line by line. Rates and stock change, so confirm the current position before you commit.
Comparing fan wattage?
Send the details and a photo. We reply with a written rate.