Before you start
Switch off at the wall switch and at the breaker, and confirm with a tester that the fan is dead. Use a stable ladder and have someone hold it. Keep the screws in a tray, and take photos of the wiring before you disconnect anything. If you smell burning or see scorch marks, stop and call a technician.
Problem 1: slow speed
A fan that runs slowly or starts only when pushed usually has a weak capacitor. Low supply voltage and dry bearings also cause it. Check the voltage first with a voltmeter, then have the capacitor tested or replaced. See ceiling fan voltage for low-voltage effects.
Problem 2: noise
Hum can come from a weak capacitor or an incompatible regulator. Rattle usually means loose blade or canopy screws, and a grinding sound points to dry or worn bearings. Tighten all screws with the power off, and if the noise persists, a technician can lubricate or replace the bearings.
Problem 3: wobble
Wobble is caused by a bent blade, uneven blade weights, loose screws or a loose hook. Tighten the blade arm and blade screws, check alignment by measuring from each blade tip to the ceiling and use balancing weights if supplied. If the hook moves, stop using the fan and get it fixed in the slab.
Problem 4: will not start
Check the breaker, the switch and the regulator first. Try another speed. A fan that hums but does not turn has a failed capacitor or jammed bearings. A silent, dead fan may have a broken wire, a failed regulator or a burnt winding. A regulator is cheap to test by bypassing it with a qualified person.
Problem 5: remote or regulator faults
If a brushless fan ignores the remote, replace the remote battery and check that the receiver in the canopy has power. Pair the remote again if the model allows it. For an AC fan with a regulator, try another speed, and replace the regulator if only some speeds work.
Tools and parts
These indicative costs help you budget common parts.
| Item | Indicative range |
|---|---|
| Capacitor | PKR 300 - 900 |
| Regulator | PKR 250 - 1,200 |
| Remote | PKR 500 - 1,500 |
| Bearings, per set | PKR 600 - 1,500 |
| Balancing weights or blade set | PKR 100 - 800 |
| Technician visit | PKR 300 - 800 |
Prices move with brand, model, size and stock. Use these ranges to judge a quote, then compare the exact model and what is included.
When to call a technician or replace
Call a technician for burning smells, sparks, hot motors, grinding noises, a wobbling hook and any wiring change. Replace the fan if the repair costs more than half a new fan, the motor is burnt or the fan is very old. A 30 watt inverter fan can save power as a replacement. Fixed wiring should be done by a licensed electrician.
Frequently Asked Questions
Often a weak capacitor, but low supply voltage, dry bearings or a faulty regulator also cause it. Check the voltage and try another speed, and have the capacitor tested or replaced. Ask for the specification in writing so you can compare quotes on the same basis.
Switch off, tighten the blade and arm screws, check blade alignment, use balancing weights if supplied and check that the hook is firm. A bent blade should be replaced. Check the warranty terms and who honours them before you pay. Measure carefully and confirm sizes with the seller before ordering.
Usually a failed capacitor or jammed bearings. Switch it off at once, because a humming motor that cannot turn heats the winding. Have it checked or the capacitor replaced. Measure carefully and confirm sizes with the seller before ordering. Rates and stock change, so confirm the current position before you commit.
Simple checks, such as tightening screws and wiping blades, yes, with the power off at the breaker. Wiring, capacitor and bearing work are best done by a technician. Rates and stock change, so confirm the current position before you commit. If you are unsure, send a photo and the measurements and we will advise.
When the repair costs more than half the price of a new fan, the motor is burnt or the fan is very old. A new inverter fan can also save power every month. If you are unsure, send a photo and the measurements and we will advise.
Message us on WhatsApp with what you need and where it will be used. We check what we can supply and send a written rate showing the model, quantity, warranty and delivery, so you can judge it against other offers. Rates and stock change, so confirm the current position before you commit.