Aluminium Sheet Price in Pakistan: Indicative Rates for Plain, Anodised and Composite Sheets, Gauge and Thickness, Alloy Grades, Cutting and Bending, Weather and Corrosion, Signage and Cladding Uses and Checks
Aluminium sheet price in Pakistan varies with thickness, alloy and whether the sheet is plain, anodised or a composite panel with a plastic core, and rates move with metal markets. Prices run from about PKR 900 to PKR 12,000 per sheet depending on type. This page covers indicative rates for plain, anodised and composite sheets, gauge and thickness, alloy grades, cutting and bending, weather and corrosion, signage and cladding uses and checks. It also covers aluminium sheet price per kg searches. For related pages see glass sheet, boards and PVC foam board.
Indicative rates
These ranges show common retail figures.
| Item | Indicative range |
|---|---|
| Plain aluminium sheet, per kg | PKR 750 - 1,000 |
| 1 mm sheet, 8 by 4 ft | PKR 5,500 - 8,500 |
| 2 mm sheet, 8 by 4 ft | PKR 10,000 - 16,000 |
| Anodised sheet, 8 by 4 ft | PKR 8,500 - 14,000 |
| Composite panel, 4 mm, 8 by 4 ft | PKR 5,500 - 12,000 |
Prices move with brand, model, size and stock. Use these ranges to judge a quote, then compare the exact model and what is included.
Plain, anodised and composite
Plain sheet is a raw metal sheet, anodised sheet has a hard decorative oxide layer, and composite panels bond two thin aluminium skins around a core for flat, light cladding.
Gauge and thickness
Thin sheets of 0.5 to 1 mm suit trim, 1.5 to 3 mm suit panels and enclosures, and thicker plates suit structural uses. Check thickness with a micrometer.
Alloy grades
Alloy 1100 is soft and easy to form, 3003 is stronger and 5052 is tougher in marine conditions. Ask for the alloy in writing.
Cutting and bending
Cut with a fine blade or shear and bend over a radius to avoid cracking. Use cutting fluid and deburr edges.
Weather and corrosion
Aluminium resists rust but corrodes next to some metals. Use matching fasteners and seal joints on outdoor cladding.
Uses and care
Common uses include signage, cladding, cabinet trims and kitchen backs. Clean with mild soap. Cutting and fixing should be done by a trained carpenter with the right blades, edge banding and fixings for the board.
Before you decide
Specify alloy and thickness and check the sheet at delivery. Measure the job and add 8 to 10 percent for cuts and waste, compare at least two quotes on the same board, thickness, face and edge finish, and keep the invoice and any warranty. Ask for a physical sample or a cut piece so you can check the face, the core and the edge in your own light, and confirm the full sheet size because 8 by 4 feet, 7 by 4 feet and metric sizes are all sold. Store sheets flat, off the floor and away from damp, because boards bow when stacked badly. Prices change with material costs, exchange rates and stock, so confirm the current figure before you decide, and be careful with very low prices that hide thin faces or weak cores.
Frequently Asked Questions
Indicative rates run from about PKR 900 to 12,000 per sheet depending on thickness and type. Ask for the specification in writing so you can compare quotes on the same basis. Check the warranty terms and who honours them before you pay.
Two aluminium skins around a core. Check the warranty terms and who honours them before you pay. Measure carefully and confirm sizes with the seller before ordering. Rates and stock change, so confirm the current position before you commit. If you are unsure, send a photo and the measurements and we will advise.
No, but it can corrode next to other metals. Measure carefully and confirm sizes with the seller before ordering. Rates and stock change, so confirm the current position before you commit. If you are unsure, send a photo and the measurements and we will advise.
1 to 2 mm sheet or a 3 to 4 mm composite. Rates and stock change, so confirm the current position before you commit. If you are unsure, send a photo and the measurements and we will advise. Ask for the specification in writing so you can compare quotes on the same basis.
Both are used, ask for per sheet at the size you need. If you are unsure, send a photo and the measurements and we will advise. Ask for the specification in writing so you can compare quotes on the same basis. Check the warranty terms and who honours them before you pay.
Send the details and a photo on WhatsApp. We confirm what we can supply and reply with a written rate that lists the model, size, warranty and delivery, so you can compare it with other quotes on the same scope. Rates and stock change, so confirm the current position before you commit.
Choosing aluminium?
Send the details and a photo. We reply with a written rate.