Glass Sheet Guide: Clear, Tinted, Frosted, Tempered and Laminated Glass for Cabinets, Partitions and Tabletops, Thickness and Safety, Edge Finishing, Indicative Rates Per Square Foot and Handling in Pakistan
A glass sheet is a flat pane used in cabinet doors, shelves, partitions, tabletops and splashbacks, and the type and thickness decide whether it is safe for the job. Tempered and laminated glass are the safe choices for most interiors. Prices run from about PKR 110 to PKR 800 per square foot. This page covers clear, tinted, frosted, tempered and laminated glass for cabinets, partitions and tabletops, thickness and safety, edge finishing, rates and handling. It also covers glass sheet price searches. For related pages see boards, laminate and HPL sheets.
Types of glass
- Clear float. Basic and economical, breaks into sharp shards.
- Tinted. Reduces glare and heat.
- Frosted. Obscure for privacy.
- Tempered. Heat-strengthened, breaks into small pieces.
- Laminated. Layers hold together when broken.
Indicative rates
These ranges show common retail figures before fitting.
| Item | Indicative range |
|---|---|
| 5 mm clear float glass, per sq ft | PKR 120 - 200 |
| 8 mm tempered glass, per sq ft | PKR 250 - 450 |
| 12 mm tempered glass, per sq ft | PKR 400 - 650 |
| Laminated glass, per sq ft | PKR 350 - 800 |
| Frosted or tinted, per sq ft | PKR 180 - 450 |
Prices move with brand, model, size and stock. Use these ranges to judge a quote, then compare the exact model and what is included.
Thickness and safety
Use 4 to 6 mm for cabinet doors, 8 to 10 mm for shelves and tabletops, and 10 to 12 mm tempered for partitions. Use safety glass anywhere people can lean or fall.
Edge finishing
Polished edges feel smooth and look clean, bevelled edges add elegance and flat ground edges are cheapest. Raw edges cut skin, so always finish edges.
Cutting and holes
Tempered glass cannot be cut or drilled after tempering, so give exact sizes and hole positions beforehand. Order a few mm of tolerance.
Handling
Carry upright, use suction cups, wear gloves and store on soft supports. Cutting and fixing should be done by a trained carpenter with the right blades, edge banding and fixings for the board.
Care
Clean with glass cleaner and soft cloths, avoid sudden heat and check fixings every year.
Before you decide
Choose safety glass for any exposed use and give exact measurements. Measure the job and add 8 to 10 percent for cuts and waste, compare at least two quotes on the same board, thickness, face and edge finish, and keep the invoice and any warranty. Ask for a physical sample or a cut piece so you can check the face, the core and the edge in your own light, and confirm the full sheet size because 8 by 4 feet, 7 by 4 feet and metric sizes are all sold. Store sheets flat, off the floor and away from damp, because boards bow when stacked badly. Prices change with material costs, exchange rates and stock, so confirm the current figure before you decide, and be careful with very low prices that hide thin faces or weak cores.
Frequently Asked Questions
Indicative rates run from about PKR 120 to 900 per square foot depending on type and thickness. Ask for the specification in writing so you can compare quotes on the same basis. Check the warranty terms and who honours them before you pay.
Tempered or laminated. Check the warranty terms and who honours them before you pay. Measure carefully and confirm sizes with the seller before ordering. Rates and stock change, so confirm the current position before you commit. If you are unsure, send a photo and the measurements and we will advise.
No, order it to size. Measure carefully and confirm sizes with the seller before ordering. Rates and stock change, so confirm the current position before you commit. If you are unsure, send a photo and the measurements and we will advise. Ask for the specification in writing so you can compare quotes on the same basis.
8 to 12 mm tempered. Rates and stock change, so confirm the current position before you commit. If you are unsure, send a photo and the measurements and we will advise. Ask for the specification in writing so you can compare quotes on the same basis.
Yes. If you are unsure, send a photo and the measurements and we will advise. Ask for the specification in writing so you can compare quotes on the same basis. Check the warranty terms and who honours them before you pay. Measure carefully and confirm sizes with the seller before ordering.
Usually the same working day once you send the quantity, the size or rating and a photo. The reply is a written rate with the model, warranty and delivery listed, so you can compare it against other quotes line by line. Rates and stock change, so confirm the current position before you commit.
Related Pages
Choosing glass?
Send the details and a photo. We reply with a written rate.