Stone and Brick Tiles: Rustic Cladding and Floor Ideas for Walls, Elevations and Courtyards
Stone and brick tiles bring rustic texture to feature walls, elevations, fireplaces and courtyards. The choices range from natural stone and brick slips to porcelain tiles that copy the look with less weight and upkeep. The surface is uneven by design, so fixing, sealing and cleaning need attention. This guide covers the types, where to use them, fixing and care. For facades, see elevation tiles design.
Types
Choose by look and weight.
| Item | Unit | Scope | Supply | Rate |
|---|---|---|---|---|
| Stone and brick tiles, by type and size | Per sq ft or per box | Material and hardware, fitting quoted separately | Supply across Pakistan | PKR 150 – 450 per sq ft |
| Adhesive and sealing | As needed | Material and hardware, fitting quoted separately | Supply across Pakistan | PKR 1,400 – 2,500 per 20 kg bag |
Frequently Asked Questions
Brick slips are thin slices of real brick, or brick-look tiles, used to clad walls and fireplaces for a rustic look without the weight of full bricks. They are fixed with adhesive and finished with mortar joints or grout. Ask for the specification in writing so you can compare quotes on the same basis.
They give a similar look with less weight, less sealing and lower upkeep, and they cost less than most natural stone. Natural stone has unique variation and a premium feel. Choose by budget, look and the care you accept. Check the warranty terms and who honours them before you pay.
On feature walls, fireplaces, entrances, courtyards and facades, lit from the side to show the texture. Avoid greasy kitchens and wet areas where the rough surface traps dirt, unless you choose a sealed, easy-clean type. Measure carefully and confirm sizes with the supplier before ordering.
Natural stone and brick need sealing in wet or exterior areas to resist stains and water. Stone-look porcelain does not. Seal after fixing, and reseal as advised. Test the sealer on a spare piece first.
Indicative ranges are about PKR 120 to 450 per sq ft for stone-look ceramic and porcelain-type tiles and PKR 600 to 2,200 for granite and natural stone, with laying at PKR 40 to 100 per sq ft. If in doubt, send a photo and the measurements and we will advise.
Send the room size, the tile size you prefer and a photo of the space on WhatsApp. We confirm what we can supply and reply with a written rate that lists the tile, the boxes needed with wastage and the adhesive and grout, so you can compare quotes on the same scope.
Choosing stone or brick tiles?
Send the room size and a photo. We reply with a written rate.