Call +92 308 4003555WhatsApp Us
ProductsWall Panels
PVC Wall PanelsFluted Wall Panels3D Wall PanelsWood PanelingStone Panels
FlooringCeilingAcoustic PanelsMDF & HPL Sheets
ZRK Sheet Price ListLasani Sheet Price
PVC SheetsLamination SheetsWall CladdingWall MouldingMedia WallWallpaperTilesUV SheetsKitchen CabinetsKitchen AppliancesCountertopsWardrobesBathroom FittingsSanitary WareBathroom VanityDoorsDoor LocksHardware & ToolsCurtainsBlindsLightingElectricalSmart HomeHome DecorSafes & Lockers CalculatorsConstruction Cost Calculator5 Marla House10 Marla House1 Kanal HousePVC Wall Panel CostFalse Ceiling Cost Areas We Serve
DHA LahoreBahria TownGulbergModel TownJohar TownLahore CanttWapda TownAskariIqbal TownGarden TownFaisal TownTownshipValencia TownRaiwind RoadLDA AvenueAllama Iqbal TownCavalry GroundMM Alam Road
CompanyServicesProjectsAbout UsBlogContact

Bib Cock Guide: Wall-Mounted Taps for Washing, Gardens and Utility, Brass and Plastic, Half Inch Size, Hose Connectors, Ceramic Disc and Washer Types, Fitting Height, Leaks, Indicative Rates and T Cocks in Pakistan

A bib cock is the simple wall-mounted tap used outdoors, in washrooms and in utility areas, usually with a threaded nose for a hose. Prices run from about PKR 150 for a plastic bib cock to PKR 1,500 for a heavy brass one. This page covers wall taps for washing, gardens and utility, brass and plastic, size, hose connectors, ceramic disc and washer types, fitting height, leaks and indicative rates. The same notes apply to the t cock, the T-shaped tap handle used on some bib cocks. For related pages see valves and bib cocks, ball valves and faucet taps.

What a bib cock is

A tap is a tap fixed to a wall with a downward-pointing spout. It is used for filling buckets, washing floors, gardens and car washing, and as a cheap tap in washrooms. The T cock is a version with a T-shaped handle, giving good grip.

Plastic wall tap beside a heavy brass wall tap on a counter for comparison, top view
Plastic wall tap beside a heavy brass wall tap on a counter

Indicative rates

These ranges show common retail figures.

tapIndicative range
Plastic tap, 1/2 inchPKR 150 - 450
Brass tap, 1/2 inchPKR 250 - 1,200
Chrome brass with hose nozzlePKR 450 - 1,500
Ceramic disc tapPKR 600 - 1,800
FittingPKR 200 - 600

Prices move with brand, model, size and stock. Use these ranges to judge a quote, then compare the exact model and what is included.

Brass or plastic

Brass lasts decades and handles heat and pressure. Plastic is cheap and fine for light garden use in shade, but cracks in sun and with rough handling. For washrooms and frequent use, choose brass with a ceramic disc.

Ceramic disc cartridge removed from a wall tap showing the seal, close-up
Ceramic disc cartridge removed from a wall tap showing the s

Washer or ceramic disc

Old-style taps use a rubber washer that wears and drips, and modern ones use a quarter-turn ceramic disc that is smooth and drip-free. Choose ceramic for daily use. Washer types are cheap to repair.

Size, hose and height

The standard size is half inch, with a threaded or ribbed nose for a hose. Fix it at 60 to 90 centimetres above the floor for buckets, or higher for hoses. Fit it into solid wall with a wall plate and thread tape. Plumbing and gas work should be done by licensed tradespeople and pressure tested before it is covered.

Leaks and care

A dripping spout means a worn washer or seat, and a leak at the wall means a loose thread or damaged pipe. Replace washers, wrap threads with tape and protect outdoor taps from frost in cold areas.

What to check before buying

  • Material. Brass for daily use
  • Valve. Ceramic disc preferred
  • Thread and nose. Half inch, hose fit
  • Fixing. Wall plate and tape

Before you decide

Choose brass with a ceramic disc for daily use, plastic only for light shaded use and fix it into solid wall. A good tap is a small cost that avoids constant drips and wasted water. Keep a few washers and a roll of thread tape at home for quick fixes.

Frequently Asked Questions

A wall-mounted tap with a downward spout, used for buckets, gardens and washing. Ask for the specification in writing so you can compare quotes on the same basis. Check the warranty terms and who honours them before you pay. Measure carefully and confirm sizes with the seller before ordering.

As indicative ranges, a plastic one is about PKR 150 to 450 and a brass one about PKR 250 to 1,200. Check the warranty terms and who honours them before you pay. Measure carefully and confirm sizes with the seller before ordering.

A tap with a T-shaped handle. Measure carefully and confirm sizes with the seller before ordering. Rates and stock change, so confirm the current position before you commit. If you are unsure, send a photo and the measurements and we will advise.

Brass with a ceramic disc for daily use. Rates and stock change, so confirm the current position before you commit. If you are unsure, send a photo and the measurements and we will advise. Ask for the specification in writing so you can compare quotes on the same basis.

Replace the washer or the ceramic cartridge. If you are unsure, send a photo and the measurements and we will advise. Ask for the specification in writing so you can compare quotes on the same basis. Check the warranty terms and who honours them before you pay.

Yes, we supply across Pakistan. Share the quantity, the size or rating and the place of use on WhatsApp. You get a written rate with the exact model, what is included and the warranty, ready to compare with any other seller. Rates and stock change, so confirm the current position before you commit.

Choosing a tap?

Send the details and a photo. We reply with a written rate.