False Ceiling Lights Guide: Recessed Downlights, Cove Strips, Panel Lights and Profile Lights, Cut-Out Sizes and Depth, Heat and Drivers, Spacing and Layout, Dimming, Indicative Rates and Installation Tips in Pakistan
False ceiling lights sit inside or behind a gypsum, POP or PVC ceiling, and the right type depends on ceiling depth, heat and the look you want. Downlights give direct light, cove strips give glow and panels give even coverage. Prices run from about PKR 250 per light to PKR 5,000 for a panel. This page covers recessed downlights, cove strips, panel lights and profile lights, cut-out sizes and depth, heat and drivers, spacing and layout, dimming, rates and installation. For related pages see down lights, linear light and false ceiling designs.
Types of false ceiling lights
- Recessed downlights. Round or square lights in cut-outs.
- Cove strips. Hidden LEDs that glow along edges.
- Panel lights. Flat square panels, even and shadow-free.
- Profile and linear lights. Slim lines for modern ceilings.
Indicative rates
These ranges show common retail figures.
| Item | Indicative range |
|---|---|
| LED downlight, 7 to 12 W | PKR 250 - 1,200 |
| Cove LED strip, per metre | PKR 300 - 1,200 |
| Panel light 2x2 | PKR 1,500 - 5,000 |
| Profile light, per foot | PKR 300 - 900 |
| Installation, per point | PKR 300 - 1,200 |
Prices move with brand, model, size and stock. Use these ranges to judge a quote, then compare the exact model and what is included.
Cut-out sizes and depth
Downlights need a specific hole diameter, commonly 70 to 100 mm for 7 to 12 W lights, and about 5 to 10 cm of depth above the board for the body and driver. Check the maker's cut-out size before cutting.
Heat and drivers
Quality LEDs run cool but their drivers produce heat, so leave ventilation and do not bury drivers in insulation. Place drivers where they can be reached through an access hatch.
Spacing and layout
Space downlights about 1 to 1.5 metres apart, away from walls by 50 to 60 cm, and avoid placing a grid of identical lights over a bed or seating. Use cove strips for ambient glow.
Dimming
Choose dimmable lights with compatible dimmers or drivers to avoid flicker, and group lights into circuits for control.
Installation tips
Plan wiring before boarding, test lights before closing the ceiling and leave an access panel. Wiring and installation should be done by a qualified electrician, with power switched off at the breaker and the circuit rating checked first.
Before you decide
Plan cut-outs, drivers and circuits before the ceiling is closed. Compare at least two quotes on the same model and specification, check the wattage, lumens, colour temperature and warranty on the box, keep the invoice and test the product before paying in full. Ask the seller about the return policy for faulty items and whether spare parts or replacement bulbs are available, and photograph the packaging on delivery. Prices change with exchange rates and stock, so confirm the current figure before you decide, and be careful with very low prices on unbranded products with exaggerated wattage claims.
Frequently Asked Questions
Recessed downlights, cove strips and panel lights. Ask for the specification in writing so you can compare quotes on the same basis. Check the warranty terms and who honours them before you pay. Measure carefully and confirm sizes with the seller before ordering.
Indicative retail rates run from about PKR 250 to 5,000 per fitting depending on type. Check the warranty terms and who honours them before you pay. Measure carefully and confirm sizes with the seller before ordering. Rates and stock change, so confirm the current position before you commit.
About 1 to 1.5 metres. Measure carefully and confirm sizes with the seller before ordering. Rates and stock change, so confirm the current position before you commit. If you are unsure, send a photo and the measurements and we will advise. Ask for the specification in writing so you can compare quotes on the same basis.
Yes, through an access hatch. Rates and stock change, so confirm the current position before you commit. If you are unsure, send a photo and the measurements and we will advise. Ask for the specification in writing so you can compare quotes on the same basis.
With dimmable lights and compatible dimmers. If you are unsure, send a photo and the measurements and we will advise. Ask for the specification in writing so you can compare quotes on the same basis. Check the warranty terms and who honours them before you pay.
Usually the same working day once you send the quantity, the size or rating and a photo. The reply is a written rate with the model, warranty and delivery listed, so you can compare it against other quotes line by line. Rates and stock change, so confirm the current position before you commit.
Choosing ceiling lights?
Send the details and a photo. We reply with a written rate.