Bulb Holder Guide: E27 and B22 Screw and Bayonet Holders, GU10 and E14 Types, Plastic, Brass and Ceramic Bodies, Pendant and Batten Holders, Wiring, Heat Limits, Safety, Indicative Rates and Replacement in Pakistan
A bulb holder, or lamp holder, connects a bulb to the wiring, and the right base type and quality matter for safety and long life. E27 screw and B22 bayonet bases are the most common in Pakistan. Prices run from about PKR 40 to PKR 600. This page covers E27 and B22 holders, GU10 and E14 types, plastic, brass and ceramic bodies, pendant and batten holders, wiring, heat limits, safety, rates and replacement. For related pages see LED bulbs, light fixtures and hanging lamp.
E27, B22, E14 and GU10 bases
E27 is the large screw base and E14 the small screw base, B22 is the bayonet base pushed and twisted in, and GU10 is a twist-lock base for spotlights. Match the holder to your bulb: a mismatch will not fit or will be unsafe.
Indicative rates
These ranges show common retail figures each.
| Item | Indicative range |
|---|---|
| Plastic E27 or B22 holder | PKR 40 - 150 |
| Brass or ceramic holder | PKR 150 - 600 |
| Pendant holder with cord | PKR 300 - 1,500 |
| GU10 or E14 holder | PKR 80 - 400 |
| Installation, each | PKR 150 - 500 |
Prices move with brand, model, size and stock. Use these ranges to judge a quote, then compare the exact model and what is included.
Plastic, brass and ceramic bodies
Plastic suits LED bulbs and low heat, while ceramic and good brass resist heat and last longer, especially with high-power bulbs. Cheap thin plastic cracks and melts. Choose better materials near heat.
Pendant and batten holders
Pendant holders hang on a flex, batten holders fix to a wall or ceiling, and angled holders suit mirrors and walls. Use cord grips on pendants and strong fixings for batten types.
Wiring and heat limits
Check the maximum wattage and voltage on the holder, tighten terminals firmly and use correct wire size. Loose connections cause overheating, so inspect them regularly.
Safety
Switch off power before changing a holder, use insulated tools and earth metal fittings properly. Replace cracked or scorched holders immediately. Wiring and installation should be done by a qualified electrician, with power switched off at the breaker and the circuit rating checked first.
Replacement
Take the old holder to the shop to match the base, check screw spacing and choose a quality brand. Keep spares on hand.
Before you decide
Match the base type, choose heat-resistant bodies for hot bulbs and tighten wiring properly. Ask the seller for the box specification, lumens and warranty in writing and test a sample before buying the full quantity. Compare at least two quotes on the same model and specification, check the wattage, lumens, colour temperature and warranty on the box, keep the invoice and test the product before paying in full. Ask the seller about the return policy for faulty items and whether spare parts or replacement bulbs are available, and photograph the packaging on delivery. Prices change with exchange rates and stock, so confirm the current figure before you decide, and be careful with very low prices on unbranded products with exaggerated wattage claims.
Frequently Asked Questions
The fitting that holds a bulb and connects it to the wiring. Ask for the specification in writing so you can compare quotes on the same basis. Check the warranty terms and who honours them before you pay. Measure carefully and confirm sizes with the seller before ordering.
Indicative retail rates run from about PKR 40 to 600 depending on material and type. Check the warranty terms and who honours them before you pay. Measure carefully and confirm sizes with the seller before ordering. Rates and stock change, so confirm the current position before you commit.
Screw and bayonet bases for bulbs. Measure carefully and confirm sizes with the seller before ordering. Rates and stock change, so confirm the current position before you commit. If you are unsure, send a photo and the measurements and we will advise.
Ceramic or good brass for hot lamps. Rates and stock change, so confirm the current position before you commit. If you are unsure, send a photo and the measurements and we will advise. Ask for the specification in writing so you can compare quotes on the same basis.
Loose connections, poor materials or overpowered bulbs. If you are unsure, send a photo and the measurements and we will advise. Ask for the specification in writing so you can compare quotes on the same basis. Check the warranty terms and who honours them before you pay.
Yes, we supply across Pakistan. Share the quantity, the size or rating and the place of use on WhatsApp. You get a written rate with the exact model, what is included and the warranty, ready to compare with any other seller. Rates and stock change, so confirm the current position before you commit.
Choosing bulb holders?
Send the details and a photo. We reply with a written rate.