Call +92 308 4003555WhatsApp Us
ProductsWall Panels
PVC Wall PanelsFluted Wall Panels3D Wall PanelsWood PanelingStone Panels
FlooringCeilingAcoustic PanelsMDF & HPL Sheets
ZRK Sheet Price ListLasani Sheet Price
PVC SheetsLamination SheetsWall CladdingWall MouldingMedia WallWallpaperTilesUV SheetsKitchen CabinetsKitchen AppliancesCountertopsWardrobesBathroom FittingsSanitary WareBathroom VanityDoorsDoor LocksHardware & ToolsCurtainsBlindsLightingElectricalSmart HomeHome DecorSafes & Lockers CalculatorsConstruction Cost Calculator5 Marla House10 Marla House1 Kanal HousePVC Wall Panel CostFalse Ceiling Cost Areas We Serve
DHA LahoreBahria TownGulbergModel TownJohar TownLahore CanttWapda TownAskariIqbal TownGarden TownFaisal TownTownshipValencia TownRaiwind RoadLDA AvenueAllama Iqbal TownCavalry GroundMM Alam Road
CompanyServicesProjectsAbout UsBlogContact

Kitchen Tap Shower Guide: Spray Heads, Pull-Out and Pull-Down Taps, Hose Length, Spray Modes, Water Pressure, Add-On Sprayers, Indicative Rates in Pakistan and Fitting Tips

A kitchen tap shower is a tap with a spray head, or a separate hand spray beside the tap, that makes rinsing pots, trays and the sink much easier. Prices run from about PKR 1,400 for an add-on sprayer to PKR 20,000 for a quality pull-out tap. This page covers spray heads, pull-out and pull-down taps, hose length, spray modes, water pressure, add-on sprayers, rates and fitting tips. For other taps see kitchen sink taps, sink mixer prices and sink tap fitting.

Types of kitchen tap shower

  • Pull-out tap. The spray head pulls straight out of the spout towards you.
  • Pull-down tap. The head pulls down from a high arc, good for deep sinks.
  • Side spray. A separate hand spray beside a normal tap.
  • Add-on sprayer. A hose and spray head that attaches to an existing tap.
Separate hand spray holster mounted beside a kitchen tap on a steel sink, close-up, daylight
Separate hand spray holster mounted beside a kitchen tap on

Indicative rates

These ranges show common retail figures.

TypeIndicative range
Add-on sprayer kitPKR 1,400 - 4,000
Side spray setPKR 2,500 - 7,000
Pull-out tap, mid rangePKR 6,000 - 15,000
Pull-down high-arc tapPKR 8,000 - 20,000
Premium pull-down tapPKR 25,000 - 100,000
Plumber, fittingPKR 500 - 1,500

Prices move with brand, model, size and stock. Use these ranges to judge a quote, then compare the exact model and what is included.

Hose length and retraction

A hose of about 50 to 70 centimetres reaches the whole sink. A good tap retracts the head smoothly with a weight on the hose. Cheap hoses kink or fail to retract, so check the weight and the mechanism.

Spray head showing stream, spray and pause buttons, close-up, daylight
Spray head showing stream

Spray modes

Most heads offer a stream and a spray, and some have a pause button. Aerated spray saves water. Simple switches work reliably, and complicated ones can break. Check the aerator can be removed for cleaning.

Water pressure

A spray head needs reasonable pressure. In low-pressure homes, choose a model rated for low pressure, and keep the supply valves fully open. A rooftop tank may need a pump for good spray. See water tanks and pumps.

Fitting

Pull-out taps need space under the sink for the hose and weight, so check the cabinet. Use braided hoses and isolation valves. Add-on sprayers connect through a diverter on the tap. Fixed plumbing should be done by a licensed plumber.

What to check before buying

  • Body metal. Brass preferred.
  • Hose and weight. Smooth retraction.
  • Hole count. Match the sink.
  • Warranty and spares. Cartridge and hose.

Cleaning and care

Wipe the spray head after use, descale the nozzle with vinegar and check the hose for kinks. Do not drag heavy pots by the hose. Replace worn hoses promptly, since a burst hose can flood a cabinet, and keep a bucket handy under the sink while testing.

Before you decide

Check the pressure at your sink, the space under it and the hole count before choosing. If you only want a spray, an add-on kit is the cheapest start. For a long-term upgrade, a good brass pull-out or pull-down tap is a pleasure to use every day.

Frequently Asked Questions

A tap with a pull-out or pull-down spray head, or a hand spray beside the tap, for rinsing pots and the sink. Ask for the specification in writing so you can compare quotes on the same basis. Check the warranty terms and who honours them before you pay.

An add-on sprayer is about PKR 1,400 to 4,000, a pull-out tap about PKR 6,000 to 15,000 and a pull-down tap about PKR 8,000 to 20,000. Check the warranty terms and who honours them before you pay. Measure carefully and confirm sizes with the seller before ordering.

Choose a model rated for low pressure, keep valves fully open and consider a pump for rooftop tanks. Measure carefully and confirm sizes with the seller before ordering. Rates and stock change, so confirm the current position before you commit. If you are unsure, send a photo and the measurements and we will advise.

About 50 to 70 centimetres, with a weight so it retracts smoothly. Rates and stock change, so confirm the current position before you commit. If you are unsure, send a photo and the measurements and we will advise. Ask for the specification in writing so you can compare quotes on the same basis.

Yes, with an add-on sprayer kit and a diverter, if the tap and sink allow it. If you are unsure, send a photo and the measurements and we will advise. Ask for the specification in writing so you can compare quotes on the same basis.

Message us on WhatsApp with what you need and where it will be used. We check what we can supply and send a written rate showing the model, quantity, warranty and delivery, so you can judge it against other offers. Rates and stock change, so confirm the current position before you commit.

Adding a spray tap?

Send the details and a photo. We reply with a written rate.