Poly Doors Price in Pakistan: Polymer and Polyurethane Doors, Waterproof Foam Core and Moulded Skins, Finishes, Frames, Indicative Rates, Installation and Quality Checks for Bathrooms and Rooms
Poly doors price in Pakistan depends on whether the door is a moulded polymer shell, a polyurethane foam door or a composite sold under a poly label, and rates run from about PKR 8,000 to PKR 28,000 per door. Poly doors are waterproof, light and easy to clean, which suits bathrooms, kitchens and utility rooms. This page lists indicative rates and covers polymer and polyurethane doors, waterproof foam core and moulded skins, finishes, frames, installation and quality checks. For related pages see plastic doors, WPC doors and fiberglass doors.
What poly door means
Poly door is a trade term for doors made of polymer or polyurethane: moulded shells filled with foam, or foamed polymer boards. The material is waterproof, does not rot or attract termites and can be moulded with wood-grain or panel textures. Quality varies, so check the construction.
Indicative rates
These ranges show common retail figures.
| Door | Indicative range |
|---|---|
| Basic moulded poly door | PKR 8,000 - 13,000 |
| Foam-filled door, textured | PKR 12,000 - 20,000 |
| Premium composite door | PKR 18,000 - 28,000 |
| Frame, per door | PKR 3,500 - 10,000 |
| Fitting and lock | PKR 1,500 - 5,000 |
Prices move with brand, model, size and stock. Use these ranges to judge a quote, then compare the exact model and what is included.
Skin and foam core
Look for even skin thickness, a dense foam fill, firm corners and no hollow sound when tapped. A thick, uniform wall resists dents and flex. Very light doors with thin skins crack and bend.
Finishes
doors come in moulded wood grain, solid colours or film finishes. Textured faces hide scratches. Check that the colour is through or UV-stable and not just surface paint, since sun fades cheap finishes.
Frames and installation
Use a poly, PVC or steel frame fixed plumb, three hinges and a lock with a long spindle. Do not over-tighten screws into thin skins. Seal the bottom edge and any cuts. Fitting should be done by a trained carpenter or fixer, and the frame and wall checked for level before the door is hung.
Quality checks
Look for a maker's name, thickness stated in millimetres, a warranty of 3 to 10 years and clean joins. Be cautious of unmarked doors at very low prices.
What to check before buying
- Skin and core. Even and filled
- Finish. UV-stable
- Frame. Matching, plumb
- Warranty. Written
Before you decide
Check the skin, core and warranty, and fit it carefully into a matching frame. A door is a light, waterproof choice for wet rooms. Ask the seller to put the thickness and warranty on the invoice, and test the leaf for flex by pressing the middle while it stands, because a good poly leaf should spring back without a crease. Keep a spare handle set and a few matching screws for later adjustments.
Frequently Asked Questions
A door made of polymer or polyurethane, usually a moulded foam-filled shell. Ask for the specification in writing so you can compare quotes on the same basis. Check the warranty terms and who honours them before you pay. Measure carefully and confirm sizes with the seller before ordering.
As indicative ranges, about PKR 8,000 to 13,000 for a basic one and PKR 18,000 to 28,000 for a premium composite. Check the warranty terms and who honours them before you pay. Measure carefully and confirm sizes with the seller before ordering.
Yes. Measure carefully and confirm sizes with the seller before ordering. Rates and stock change, so confirm the current position before you commit. If you are unsure, send a photo and the measurements and we will advise. Ask for the specification in writing so you can compare quotes on the same basis.
Cheap finishes can, so ask about UV stability. Rates and stock change, so confirm the current position before you commit. If you are unsure, send a photo and the measurements and we will advise. Ask for the specification in writing so you can compare quotes on the same basis.
Look at skin thickness, core, joins and warranty. If you are unsure, send a photo and the measurements and we will advise. Ask for the specification in writing so you can compare quotes on the same basis. Check the warranty terms and who honours them before you pay.
Usually the same working day once you send the quantity, the size or rating and a photo. The reply is a written rate with the model, warranty and delivery listed, so you can compare it against other quotes line by line. Rates and stock change, so confirm the current position before you commit.
Choosing a door?
Send the details and a photo. We reply with a written rate.