Call +92 308 4003555WhatsApp Us
ProductsWall Panels
PVC Wall PanelsFluted Wall Panels3D Wall PanelsWood PanelingStone Panels
FlooringCeilingAcoustic PanelsMDF & HPL Sheets
ZRK Sheet Price ListLasani Sheet Price
PVC SheetsLamination SheetsWall CladdingWall MouldingMedia WallWallpaperTilesUV SheetsKitchen CabinetsKitchen AppliancesCountertopsWardrobesBathroom FittingsSanitary WareBathroom VanityDoorsDoor LocksHardware & ToolsCurtainsBlindsLightingElectricalSmart HomeHome DecorSafes & Lockers CalculatorsConstruction Cost Calculator5 Marla House10 Marla House1 Kanal HousePVC Wall Panel CostFalse Ceiling Cost Areas We Serve
DHA LahoreBahria TownGulbergModel TownJohar TownLahore CanttWapda TownAskariIqbal TownGarden TownFaisal TownTownshipValencia TownRaiwind RoadLDA AvenueAllama Iqbal TownCavalry GroundMM Alam Road
CompanyServicesProjectsAbout UsBlogContact

Fiberglass Doors Guide: FRP Skins, Foam Core Insulation, Wood-Grain Textures, Durability Against Sun, Rain and Termites, Security, Frames, Indicative Rates, Installation and Quality Checks in Pakistan

Fiberglass doors have glass-reinforced plastic skins over a foam or wood core, and they are strong, insulating and resistant to rain, sun and termites, which suits entrances and balconies in Pakistan. Prices run from about PKR 14,000 to PKR 55,000 per door. This page covers FRP skins, foam core insulation, wood-grain textures, durability, security, frames, indicative rates, installation and quality checks. For related pages see plastic doors, WPC doors and entry doors.

Construction

Two thin skins of glass-reinforced plastic, moulded with a wood-grain or smooth texture, are bonded to a timber frame and a polyurethane foam core. The skins resist dents better than steel and do not rust or swell, and the foam adds insulation.

Cut edge of a fiberglass door showing the skin, foam core and a timber frame, close-up
Cut edge of a fiberglass door showing the skin

Indicative rates

These ranges show common retail figures per door.

DoorIndicative range
Plain fiberglass doorPKR 14,000 - 24,000
Wood-grain fiberglass entry doorPKR 22,000 - 40,000
Door with glass inserts or sidelightsPKR 35,000 - 55,000
Frame, per doorPKR 6,000 - 15,000
Fitting and lockPKR 3,000 - 9,000

Prices move with brand, model, size and stock. Use these ranges to judge a quote, then compare the exact model and what is included.

Durability and weather

Fiberglass resists rain, humidity, termites and rot, and handles heat better than wood. It may fade in strong sun if the finish is poor, so choose UV-stable paint or stain. Seal the bottom edge.

Embossed wood-grain texture on a fiberglass door surface being touched, close-up
Embossed wood-grain texture on a fiberglass door surface bei

Insulation and noise

The foam core reduces heat and noise transfer, helping rooms stay cooler in summer and quieter. Good seals around the frame add to the effect.

Security

A fiberglass door is not as hard to break as steel, but with a strong frame, a multi-point lock and proper hinges, it is adequate for most homes. For high-risk sites, choose a steel security door.

Frames and fitting

Use a timber or steel frame matched to the leaf, fixed plumb, with three hinges and a gap that is sealed. Do not cut the skin without sealing. Fitting should be done by a trained carpenter or fixer, and the frame and wall checked for level before the door is hung.

Quality checks

Check for even skin thickness, no cracks, a sealed edge and a firm core. Ask for a written warranty, often 5 to 10 years against delamination and rot.

What to check before buying

  • Skins and core. Even and firm
  • Finish. UV-stable
  • Frame and lock. Strong, multi-point
  • Warranty. Written

Before you decide

Choose a UV-stable finish, a strong frame and a good lock. A fiberglass door is a weatherproof, low-maintenance entrance choice. Ask the seller to confirm the skin thickness and core, and keep the warranty with the invoice. Also ask whether the door can be trimmed on site without voiding the warranty, since small adjustments are often needed at fitting, and check that the supplier stocks the same finish in case a replacement leaf or sidelight is needed later.

Frequently Asked Questions

A door with fibreglass-reinforced plastic skins over a foam or timber core. Ask for the specification in writing so you can compare quotes on the same basis. Check the warranty terms and who honours them before you pay. Measure carefully and confirm sizes with the seller before ordering.

As indicative ranges, a plain door is about PKR 14,000 to 24,000 and a wood-grain entry door about PKR 22,000 to 40,000. Check the warranty terms and who honours them before you pay. Measure carefully and confirm sizes with the seller before ordering.

No. Measure carefully and confirm sizes with the seller before ordering. Rates and stock change, so confirm the current position before you commit. If you are unsure, send a photo and the measurements and we will advise. Ask for the specification in writing so you can compare quotes on the same basis.

With a strong frame and lock, adequate for most homes. Rates and stock change, so confirm the current position before you commit. If you are unsure, send a photo and the measurements and we will advise. Ask for the specification in writing so you can compare quotes on the same basis.

Yes, the foam core reduces heat and noise. If you are unsure, send a photo and the measurements and we will advise. Ask for the specification in writing so you can compare quotes on the same basis. Check the warranty terms and who honours them before you pay.

Send the details and a photo on WhatsApp. We confirm what we can supply and reply with a written rate that lists the model, size, warranty and delivery, so you can compare it with other quotes on the same scope. Rates and stock change, so confirm the current position before you commit.

Choosing a fiberglass door?

Send the details and a photo. We reply with a written rate.