Call +92 308 4003555WhatsApp Us
ProductsWall Panels
PVC Wall PanelsFluted Wall Panels3D Wall PanelsWood PanelingStone Panels
FlooringCeilingAcoustic PanelsMDF & HPL Sheets
ZRK Sheet Price ListLasani Sheet Price
PVC SheetsLamination SheetsWall CladdingWall MouldingMedia WallWallpaperTilesUV SheetsKitchen CabinetsKitchen AppliancesCountertopsWardrobesBathroom FittingsSanitary WareBathroom VanityDoorsDoor LocksHardware & ToolsCurtainsBlindsLightingElectricalSmart HomeHome DecorSafes & Lockers CalculatorsConstruction Cost Calculator5 Marla House10 Marla House1 Kanal HousePVC Wall Panel CostFalse Ceiling Cost Areas We Serve
DHA LahoreBahria TownGulbergModel TownJohar TownLahore CanttWapda TownAskariIqbal TownGarden TownFaisal TownTownshipValencia TownRaiwind RoadLDA AvenueAllama Iqbal TownCavalry GroundMM Alam Road
CompanyServicesProjectsAbout UsBlogContact

Entry Doors Guide: Wood, Steel, Fiberglass, Aluminium and UPVC Entry Doors Compared on Security, Weather Resistance, Insulation, Locks, Frames, Glass, Indicative Rates and Installation in Pakistan

Entry doors face rain, sun, dust and intruders every day, so the material, frame and lock matter more than the style. Prices run from about PKR 25,000 to PKR 200,000 per door. This page compares wood, steel, fiberglass, aluminium and UPVC entry doors on security, weather resistance, insulation, locks, frames, glass, indicative rates and installation. For related pages see fiberglass doors, pivot doors and main entrance door designs.

Materials compared

  • Solid wood. Warm and strong, needs sealing and upkeep.
  • Steel. Very secure, can rust and get hot.
  • Fiberglass. Weatherproof and insulating, medium security.
  • Aluminium and glass. Light and modern, for covered entrances.
  • UPVC. Weatherproof and cheap, lower security.
Steel security entry door with a multi-point lock and a peephole, daylight
Steel security entry door with a multi-point lock and a peep

Indicative rates

These ranges show common retail figures per door.

DoorIndicative range
UPVC entry doorPKR 25,000 - 45,000
Fiberglass entry doorPKR 22,000 - 55,000
Steel security doorPKR 35,000 - 120,000
Solid wood entry doorPKR 45,000 - 200,000
Aluminium and glass entry doorPKR 35,000 - 90,000
Lock upgradePKR 5,000 - 25,000

Prices move with brand, model, size and stock. Use these ranges to judge a quote, then compare the exact model and what is included.

Security

Security depends on the leaf, the frame, the hinges and the lock. A steel or solid wood door with a strong frame and a multi-point lock is the safest. Hinge bolts, a door viewer and a chain add protection. Weak frames fail before the leaf does.

Comparison table sheet of entry door materials pinned to a wall beside samples, top view
Comparison table sheet of entry door materials pinned to a w

Weather and insulation

Entrance doors take direct sun and rain. Fiberglass and UPVC resist weather best, wood needs a good finish and a porch, and steel needs rust protection. Foam-core leaves and good seals reduce heat and noise.

Frames and thresholds

A strong frame, set in concrete or fixed with heavy anchors, is as important as the leaf. Use a raised threshold with a drip and weather seal to keep water out. Treat timber frames against termites.

Glass and light

Glass panels bring light but reduce security, so use laminated glass and place panels away from the lock. Frosted or reeded glass gives privacy. Sidelights can add light without a weak door.

Locks and installation

Fit a multi-point lock or a deadbolt with a reinforced strike plate and a good cylinder. Hang on three or four hinges. Fitting should be done by a trained carpenter or fixer, and the frame and wall checked for level before the door is hung.

What to check before buying

  • Leaf and frame. Strong, matched
  • Lock. Multi-point or deadbolt
  • Weather seals. Threshold and edge seals
  • Glass. Laminated if used

Before you decide

Pick the material for the weather and security you need, build a strong frame and fit a good lock. A good entry door protects the home and sets the tone of the house. Ask for the specification and warranty in writing and keep the lock keys' numbers.

Frequently Asked Questions

Steel or solid wood for security, fiberglass or UPVC for weather resistance. Ask for the specification in writing so you can compare quotes on the same basis. Check the warranty terms and who honours them before you pay. Measure carefully and confirm sizes with the seller before ordering.

As indicative ranges, a UPVC door is about PKR 25,000 to 45,000, a steel security door about PKR 35,000 to 120,000 and a solid wood door about PKR 45,000 to 200,000. Check the warranty terms and who honours them before you pay.

A strong leaf, frame, hinges and a multi-point lock. Measure carefully and confirm sizes with the seller before ordering. Rates and stock change, so confirm the current position before you commit. If you are unsure, send a photo and the measurements and we will advise.

Use laminated glass and keep it away from the lock. Rates and stock change, so confirm the current position before you commit. If you are unsure, send a photo and the measurements and we will advise. Ask for the specification in writing so you can compare quotes on the same basis.

A raised threshold with a drip and weather seals. If you are unsure, send a photo and the measurements and we will advise. Ask for the specification in writing so you can compare quotes on the same basis. Check the warranty terms and who honours them before you pay.

Yes, we supply across Pakistan. Share the quantity, the size or rating and the place of use on WhatsApp. You get a written rate with the exact model, what is included and the warranty, ready to compare with any other seller. Rates and stock change, so confirm the current position before you commit.

Choosing an entry door?

Send the details and a photo. We reply with a written rate.