PVC Panel Price in Pakistan: Indicative Rates Per Panel and Per Sheet by Size and Thickness, Hollow and Solid Cores, Print and Finish Effects, What the Quote Should Include, Hidden Extras and Checks Before Buying
PVC panel price in Pakistan is usually quoted per panel or per sheet, which makes comparing offers confusing because sizes differ. Converting every quote to a price per square foot is the fix. Prices run from about PKR 450 to PKR 4,500 per panel or sheet depending on size and thickness. This page covers indicative rates per panel and per sheet by size and thickness, hollow and solid cores, print and finish effects, what the quote should include, hidden extras and checks before buying. It also covers PVC panel rate per piece searches. For related pages see PVC wall panels, PVC wall paneling rate and panel price in Pakistan.
Indicative rates
These ranges show common retail figures before fitting.
| Item | Indicative range |
|---|---|
| Small 25 cm by 2.4 m panel | PKR 450 - 900 |
| Standard 25 cm by 3 m panel | PKR 600 - 1,300 |
| Thick 8 mm decorative panel | PKR 900 - 1,800 |
| Full 4 by 8 ft sheet, 3 mm | PKR 2,000 - 3,200 |
| Full 4 by 8 ft sheet, 8 mm | PKR 3,000 - 4,500 |
Prices move with brand, model, size and stock. Use these ranges to judge a quote, then compare the exact model and what is included.
Convert to a price per square foot
Multiply width by length in feet and divide the price by the area. A 25 cm by 3 m panel covers about 8 square feet, so PKR 800 means about PKR 100 per square foot. Compare every quote this way.
Hollow and solid cores
Hollow panels are light and cheap, while solid or foamed panels resist dents and hold fixings. Check wall thickness and the weight in hand.
Print and finish effects
Heat-transfer prints, laminated films and gloss coatings change price. Laminated panels resist scratches and fading better than thin printed ones.
What the quote should include
Ask whether the quote covers panels, trims, corners, adhesive, battens, cutting and labour, and whether waste is included. A low panel price can hide expensive extras.
Hidden extras
Trims, end caps, silicone, transport and wall preparation add 15 to 30 percent. List them separately.
Checks before buying
Check thickness, colour batch and straightness, and ask for a sample. Fixing should be done by a trained installer on a dry, level wall, using battens and fixings suited to the wall type and the weight of the panel.
Before you decide
Convert every quote to a price per square foot and list extras. Measure each wall and add 8 to 10 percent for cuts and waste, compare at least two quotes on the same material, thickness, finish and fitting scope, and keep the invoice and any warranty. Ask for a full sample panel and look at it in the room's own light, check that the wall is dry because panels trap moisture, and plan sockets, switches and lights before fixing begins. Order every panel together so that colour and pattern match, keep a spare panel for repairs, and inspect the finished wall in daylight before you make the final payment. Prices change with material costs and stock, so confirm the current figure before you decide.
Frequently Asked Questions
Indicative rates run from about PKR 450 to 4,500 per panel or sheet depending on size and thickness. Ask for the specification in writing so you can compare quotes on the same basis. Check the warranty terms and who honours them before you pay.
Convert each to a price per square foot. Check the warranty terms and who honours them before you pay. Measure carefully and confirm sizes with the seller before ordering. Rates and stock change, so confirm the current position before you commit. If you are unsure, send a photo and the measurements and we will advise.
Usually not, ask. Measure carefully and confirm sizes with the seller before ordering. Rates and stock change, so confirm the current position before you commit. If you are unsure, send a photo and the measurements and we will advise. Ask for the specification in writing so you can compare quotes on the same basis.
Yes. Rates and stock change, so confirm the current position before you commit. If you are unsure, send a photo and the measurements and we will advise. Ask for the specification in writing so you can compare quotes on the same basis.
Trims, adhesive, battens and labour. If you are unsure, send a photo and the measurements and we will advise. Ask for the specification in writing so you can compare quotes on the same basis. Check the warranty terms and who honours them before you pay.
Send the quantity, the size or rating and a photo of the space. We reply with a written rate that names the model and the warranty, and lists what is and is not included, so the comparison with other sellers is fair.
Comparing PVC panel prices?
Send the details and a photo. We reply with a written rate.