Call +92 308 4003555WhatsApp Us
ProductsWall Panels
PVC Wall PanelsFluted Wall Panels3D Wall PanelsWood PanelingStone Panels
FlooringCeilingAcoustic PanelsMDF & HPL Sheets
ZRK Sheet Price ListLasani Sheet Price
PVC SheetsLamination SheetsWall CladdingWall MouldingMedia WallWallpaperTilesUV SheetsKitchen CabinetsKitchen AppliancesCountertopsWardrobesBathroom FittingsSanitary WareBathroom VanityDoorsDoor LocksHardware & ToolsCurtainsBlindsLightingElectricalSmart HomeHome DecorSafes & Lockers CalculatorsConstruction Cost Calculator5 Marla House10 Marla House1 Kanal HousePVC Wall Panel CostFalse Ceiling Cost Areas We Serve
DHA LahoreBahria TownGulbergModel TownJohar TownLahore CanttWapda TownAskariIqbal TownGarden TownFaisal TownTownshipValencia TownRaiwind RoadLDA AvenueAllama Iqbal TownCavalry GroundMM Alam Road
CompanyServicesProjectsAbout UsBlogContact

Plastic Bathtub Price in Pakistan: PVC, Fibreglass and Acrylic-Coated Tubs, Portable and Fixed Types, Sizes, Thickness, Strength, Weight, Installation and Indicative Rates

Plastic bathtub price in Pakistan runs from about PKR 6,000 for a small portable tub to PKR 40,000 for a large fibreglass one, and the material, thickness and size explain the spread. This page lists indicative rates and covers PVC, fibreglass and acrylic-coated tubs, portable and fixed types, sizes, thickness, strength, weight, installation and quotes. For related pages see plastic tubs, bathtub sizes and bath tub prices.

Indicative rates

These ranges show common retail figures.

TubIndicative range
Small portable plastic tubPKR 6,000 - 12,000
PVC or plastic bathtub, 150 cmPKR 8,000 - 20,000
Fibreglass tub, 170 cmPKR 20,000 - 40,000
Acrylic-coated tubPKR 25,000 - 50,000
Plumber, installationPKR 3,000 - 8,000
Waste and trapPKR 800 - 2,500

Prices move with brand, model, size and stock. Use these ranges to judge a quote, then compare the exact model and what is included.

Portable folding plastic tub standing in a bathroom corner with a bucket, daylight
Portable folding plastic tub standing in a bathroom corner w

Material types

  • PVC or plastic. The cheapest, light, with a thinner shell.
  • Fibreglass. Layered resin and glass, stronger, can be repaired.
  • Acrylic-coated. A glossy surface that resists stains and wear.
  • Portable tub. A folding or moulded tub with no fixed plumbing.

Thickness and strength

A thin plastic shell flexes and cracks, so look for a thick, reinforced shell, a rigid rim and a supported base. Press on the base and sides in the shop to test flex. Fibreglass tubs should have an even gel coat.

Cross-section of a fibreglass tub edge showing layers, close-up, bright light
Cross-section of a fibreglass tub edge showing layers

Sizes

Common lengths are 120 to 180 centimetres, widths 70 to 80 and depths 40 to 55. Measure the room and the door before buying. See bathtub sizes for clearances.

Weight and support

A plastic tub is light, about 15 to 30 kilograms empty, but a full tub with a person can weigh 300 kilograms or more. Support the tub with a frame or a cement bed so the base does not flex or crack. A tub on an uneven floor will fail.

Installation

Set the tub level, connect the waste with a trap, seal the rim to the wall with silicone and tile above it. Test for leaks before closing. Fixed plumbing should be done by a licensed plumber.

How to compare quotes

Compare material, thickness, size, what is included, such as waste, overflow, taps and support frame, and warranty. Ask for an itemised quote.

What to check before buying

  • Material and thickness. Rigid shell
  • Size. Fits room and door
  • Support. Frame or bed
  • Warranty. Written

Plastic or acrylic

A plastic tub saves money and weight, while acrylic costs more but resists stains and scratches longer. For a rental or a guest bathroom, plastic is practical.

Before you decide

Measure the room, test the rigidity and plan the support. A well installed plastic bathtub is an affordable way to add a tub. Ask the seller what happens if the tub arrives scratched or cracked, keep the packing until it is fitted, and avoid dragging it across the floor, because a small crack in the gel coat near the drain grows quickly once water gets in.

Frequently Asked Questions

A PVC or plastic tub is about PKR 8,000 to 20,000, a fibreglass tub about PKR 20,000 to 40,000 and a small portable tub about PKR 6,000 to 12,000. Ask for the specification in writing so you can compare quotes on the same basis.

Thick, reinforced shells with a supported base are, but thin ones can crack. Check the warranty terms and who honours them before you pay. Measure carefully and confirm sizes with the seller before ordering. Rates and stock change, so confirm the current position before you commit.

Common lengths are 120 to 180 centimetres, so measure the room and door. Measure carefully and confirm sizes with the seller before ordering. Rates and stock change, so confirm the current position before you commit. If you are unsure, send a photo and the measurements and we will advise.

Yes, a frame or cement bed under the base. Rates and stock change, so confirm the current position before you commit. If you are unsure, send a photo and the measurements and we will advise. Ask for the specification in writing so you can compare quotes on the same basis.

It resists stains and scratches longer, but costs more. If you are unsure, send a photo and the measurements and we will advise. Ask for the specification in writing so you can compare quotes on the same basis. Check the warranty terms and who honours them before you pay.

Usually the same working day once you send the quantity, the size or rating and a photo. The reply is a written rate with the model, warranty and delivery listed, so you can compare it against other quotes line by line. Rates and stock change, so confirm the current position before you commit.

Comparing tub prices?

Send the details and a photo. We reply with a written rate.