Call +92 308 4003555WhatsApp Us
ProductsWall Panels
PVC Wall PanelsFluted Wall Panels3D Wall PanelsWood PanelingStone Panels
FlooringCeilingAcoustic PanelsMDF & HPL Sheets
ZRK Sheet Price ListLasani Sheet Price
PVC SheetsLamination SheetsWall CladdingWall MouldingMedia WallWallpaperTilesUV SheetsKitchen CabinetsKitchen AppliancesCountertopsWardrobesBathroom FittingsSanitary WareBathroom VanityDoorsDoor LocksHardware & ToolsCurtainsBlindsLightingElectricalSmart HomeHome DecorSafes & Lockers CalculatorsConstruction Cost Calculator5 Marla House10 Marla House1 Kanal HousePVC Wall Panel CostFalse Ceiling Cost Areas We Serve
DHA LahoreBahria TownGulbergModel TownJohar TownLahore CanttWapda TownAskariIqbal TownGarden TownFaisal TownTownshipValencia TownRaiwind RoadLDA AvenueAllama Iqbal TownCavalry GroundMM Alam Road
CompanyServicesProjectsAbout UsBlogContact

One Piece Toilet Guide: How It Differs From Two-Piece, Easy Cleaning, Size, Weight, Heights, Flush Systems, Repair Limits, Fitting and Indicative Rates in Pakistan

A one piece toilet has the bowl and cistern moulded as a single unit, so there is no gap between them to clean, and the look is sleek, but it is heavier and costs more than a two-piece. Prices run from about PKR 10,000 to PKR 22,000. This page covers how it differs from a two-piece, easy cleaning, size, weight, heights, flush systems, repair limits, fitting and rates in Pakistan. For related pages see WC commodes, WC prices and English toilets.

One piece or two-piece

A two-piece has a separate cistern bolted to the bowl, so the joint can leak and collect dirt, while a one piece is fused and smoother. A one piece is heavier, harder to carry and costs a little more. Parts are less interchangeable.

Comparison of a one piece and a two piece toilet showing the joint between bowl and cistern, bright light
Comparison of a one piece and a two piece toilet showing the

Indicative rates

These ranges show common retail figures.

ToiletIndicative range
Basic one piece toiletPKR 10,000 - 14,000
One piece with dual flushPKR 14,000 - 22,000
Rimless or siphonic one piecePKR 18,000 - 40,000
Slow-close seatPKR 2,000 - 3,000
Flush fittingsPKR 1,300 - 1,500
Plumber, fittingPKR 1,500 - 5,000

Prices move with brand, model, size and stock. Use these ranges to judge a quote, then compare the exact model and what is included.

Easy cleaning

No gap between bowl and cistern means fewer places for dirt and a skirted base hides the trap, giving a smooth wipe-clean surface. Rimless bowls remove the hidden ledge under the rim.

Two people lifting a heavy one piece toilet into a bathroom, daylight
Two people lifting a heavy one piece toilet into a bathroom

Size and weight

A one piece toilet is about 65 to 75 centimetres long, and it can weigh 30 to 45 kilograms, so two people should carry it. Measure doorways and the rough-in, usually 30 centimetres.

Flush systems

Look for a dual flush of 3 and 6 litres, a strong rim wash and a quiet fill valve. Siphonic types are quieter and cost more. Check the flush on a model if you can.

Repair limits

The cistern cannot be replaced alone, since a crack in either part means replacing the whole unit. Fittings can still be repaired with a kit. Buy a known type to ensure spares are available.

Fitting

Bolt the unit to the floor, seal the outlet and connect the supply. Place it on a level floor and do not overtighten the bolts. Fixed plumbing should be done by a licensed plumber.

What to check before buying

  • Trap and rough-in. Matches your drain
  • Weight and access. Door and stairs
  • Flush. Dual and strong
  • Spares. Available

Who should choose it

Choose this type for a modern look and easy cleaning, and a two-piece for lower cost and easier carrying. Both work well when fitted correctly.

Before you decide

Check weight, rough-in and flush, and confirm spares. A one piece toilet is a neat, easy-clean choice for a modern bathroom. Keep the box until the unit is fitted and flushed several times, since a crack from carrying shows up only after water goes in, and ask the seller what the return rule is for a unit that arrives damaged.

Frequently Asked Questions

A toilet with the bowl and cistern moulded as one unit. Ask for the specification in writing so you can compare quotes on the same basis. Check the warranty terms and who honours them before you pay. Measure carefully and confirm sizes with the seller before ordering.

About PKR 10,000 to 22,000 for common models and PKR 18,000 to 40,000 for rimless or siphonic types. Check the warranty terms and who honours them before you pay. Measure carefully and confirm sizes with the seller before ordering. Rates and stock change, so confirm the current position before you commit.

Yes, because there is no joint between bowl and cistern. Measure carefully and confirm sizes with the seller before ordering. Rates and stock change, so confirm the current position before you commit. If you are unsure, send a photo and the measurements and we will advise.

A cracked unit must be replaced whole, though fittings can be repaired. Rates and stock change, so confirm the current position before you commit. If you are unsure, send a photo and the measurements and we will advise. Ask for the specification in writing so you can compare quotes on the same basis.

About 30 to 45 kilograms, so two people should carry it. If you are unsure, send a photo and the measurements and we will advise. Ask for the specification in writing so you can compare quotes on the same basis. Check the warranty terms and who honours them before you pay.

Send the details and a photo on WhatsApp. We confirm what we can supply and reply with a written rate that lists the model, size, warranty and delivery, so you can compare it with other quotes on the same scope. Rates and stock change, so confirm the current position before you commit.

Choosing a one piece toilet?

Send the details and a photo. We reply with a written rate.