Fiber Wall Sheet Price in Pakistan: Indicative Rates for FRP and Fibre Wall Panels, Thickness and Gel Coat, Moisture and Hygiene Uses, Fire and UV Limits, Fixing and Sealing and Checks Before Buying
Fiber wall sheet price in Pakistan usually refers to FRP or fibre-reinforced wall panels, which give a tough, hygienic, wipe-clean face for kitchens, hospitals, labs and factories. Quality varies by resin and gel coat. Prices run from about PKR 150 to PKR 480 per square foot. This page covers indicative rates for FRP and fibre wall panels, thickness and gel coat, moisture and hygiene uses, fire and UV limits, fixing and sealing and checks before buying. It also covers fibre wall panel searches. For related pages see plastic wall sheets, kitchen PVC sheet and wall paneling sheets.
Indicative rates
These ranges show common retail figures before fitting.
| Item | Indicative range |
|---|---|
| 1.5 mm FRP wall sheet, per sq ft | PKR 150 - 230 |
| 2 mm FRP wall sheet, per sq ft | PKR 200 - 320 |
| 3 mm FRP wall sheet, per sq ft | PKR 280 - 480 |
| Trims and sealant | PKR 400 - 2,000 |
| Fitting, per sq ft | PKR 30 - 90 |
Prices move with brand, model, size and stock. Use these ranges to judge a quote, then compare the exact model and what is included.
Thickness and gel coat
Thicker sheets resist impact and a good gel coat resists stains and cleaning chemicals. Ask for gel coat thickness and test with a sample.
Moisture and hygiene uses
FRP panels suit commercial kitchens, hospital walls, labs and food factories because they are non-porous and easy to clean. They also suit bathrooms.
Fire and UV limits
Standard fibre sheets can burn and fade in sun, so choose fire-retardant and UV-stable grades where needed.
Fixing and sealing
Fix with adhesive and trims, leaving a small gap for expansion, and seal joints with a mould-resistant sealant.
Quality checks
Check face smoothness, even thickness and clean edges, and ask for resin type and warranty.
Care
Wipe with mild detergent. Cutting and fixing should be done by a trained carpenter with the right blades, edge banding and fixings for the board.
Before you decide
Choose the thickness and fire grade for the room and seal all joints. Measure the job and add 8 to 10 percent for cuts and waste, compare at least two quotes on the same board, thickness, face and edge finish, and keep the invoice and any warranty. Ask for a physical sample or a cut piece so you can check the face, the core and the edge in your own light, and confirm the full sheet size because 8 by 4 feet, 7 by 4 feet and metric sizes are all sold. Store sheets flat, off the floor and away from damp, because boards bow when stacked badly. Prices change with material costs, exchange rates and stock, so confirm the current figure before you decide, and be careful with very low prices that hide thin faces or weak cores.
Frequently Asked Questions
A fibre-reinforced plastic panel for walls. Ask for the specification in writing so you can compare quotes on the same basis. Check the warranty terms and who honours them before you pay. Measure carefully and confirm sizes with the seller before ordering.
Indicative rates run from about PKR 150 to 480 per square foot before fitting. Check the warranty terms and who honours them before you pay. Measure carefully and confirm sizes with the seller before ordering. Rates and stock change, so confirm the current position before you commit.
Kitchens, labs and hospitals. Measure carefully and confirm sizes with the seller before ordering. Rates and stock change, so confirm the current position before you commit. If you are unsure, send a photo and the measurements and we will advise. Ask for the specification in writing so you can compare quotes on the same basis.
Yes. Rates and stock change, so confirm the current position before you commit. If you are unsure, send a photo and the measurements and we will advise. Ask for the specification in writing so you can compare quotes on the same basis.
Yes, for edges and corners. If you are unsure, send a photo and the measurements and we will advise. Ask for the specification in writing so you can compare quotes on the same basis. Check the warranty terms and who honours them before you pay.
Send the details and a photo on WhatsApp. We confirm what we can supply and reply with a written rate that lists the model, size, warranty and delivery, so you can compare it with other quotes on the same scope. Rates and stock change, so confirm the current position before you commit.
Choosing fibre wall sheets?
Send the details and a photo. We reply with a written rate.