Wall Wood Sheet Guide: Wood-Look MDF, Plywood, Veneer and Laminate Sheets for Feature Walls, Thickness, Fixing, Grooved Patterns, Moisture and Termite Care, Indicative Rates Per Square Foot and Installation in Pakistan
A wall wood sheet is a wood or wood-look board fixed to a wall as a feature panel, TV backdrop or headboard wall, and it adds warmth faster than tiles or wallpaper. Moisture, termites and fixing method decide how well it lasts. Prices run from about PKR 120 to PKR 450 per square foot. This page covers wood-look MDF, plywood, veneer and laminate sheets for feature walls, thickness, fixing, grooved patterns, moisture and termite care, rates and installation. It also covers wooden wall sheet searches. For related pages see MDF wall panels, veneer sheets and wood sheets.
Indicative rates
These ranges show common retail figures before fitting.
| Item | Indicative range |
|---|---|
| Laminated MDF wall sheet, per sq ft | PKR 120 - 200 |
| Veneered MDF or ply sheet, per sq ft | PKR 200 - 350 |
| Solid wood-look grooved panel, per sq ft | PKR 250 - 450 |
| Battens and fixings, per sq ft | PKR 25 - 60 |
| Fitting, per sq ft | PKR 30 - 90 |
Prices move with brand, model, size and stock. Use these ranges to judge a quote, then compare the exact model and what is included.
Sheet types
MDF with laminate is economical, veneered boards look richer and grooved panels add rhythm and shadow. Plywood resists damp better than plain MDF.
Thickness
Use 9 to 12 mm for light cladding and 18 mm where fixings need strength. Thicker sheets stay flatter on longer walls.
Fixing
Fix on treated battens set at 40 to 60 cm centres, leaving small expansion gaps. Use screws and adhesive where appropriate. Never fix to a damp wall.
Moisture and termites
Treat wall dampness first and use a vapour barrier on exterior walls. Use termite-treated boards in vulnerable homes.
Grooved patterns
Vertical grooves make ceilings feel higher, and horizontal grooves widen walls. Keep groove spacing consistent and align across sheets.
Finish and care
Wipe with a dry cloth and keep away from water. Cutting and fixing should be done by a trained carpenter with the right blades, edge banding and fixings for the board.
Before you decide
Fix a wall wood sheet only to dry walls and match groove alignment across sheets. Measure the job and add 8 to 10 percent for cuts and waste, compare at least two quotes on the same board, thickness, face and edge finish, and keep the invoice and any warranty. Ask for a physical sample or a cut piece so you can check the face, the core and the edge in your own light, and confirm the full sheet size because 8 by 4 feet, 7 by 4 feet and metric sizes are all sold. Store sheets flat, off the floor and away from damp, because boards bow when stacked badly. Prices change with material costs, exchange rates and stock, so confirm the current figure before you decide, and be careful with very low prices that hide thin faces or weak cores.
Frequently Asked Questions
A wood or wood-look board fixed to a wall as cladding. Ask for the specification in writing so you can compare quotes on the same basis. Check the warranty terms and who honours them before you pay. Measure carefully and confirm sizes with the seller before ordering.
Indicative rates run from about PKR 120 to 450 per square foot before fitting. Check the warranty terms and who honours them before you pay. Measure carefully and confirm sizes with the seller before ordering. Rates and stock change, so confirm the current position before you commit.
In dry rooms, seal it from damp. Measure carefully and confirm sizes with the seller before ordering. Rates and stock change, so confirm the current position before you commit. If you are unsure, send a photo and the measurements and we will advise.
On treated battens with screws. Rates and stock change, so confirm the current position before you commit. If you are unsure, send a photo and the measurements and we will advise. Ask for the specification in writing so you can compare quotes on the same basis.
They change how tall or wide a room feels. If you are unsure, send a photo and the measurements and we will advise. Ask for the specification in writing so you can compare quotes on the same basis. Check the warranty terms and who honours them before you pay.
Usually the same working day once you send the quantity, the size or rating and a photo. The reply is a written rate with the model, warranty and delivery listed, so you can compare it against other quotes line by line. Rates and stock change, so confirm the current position before you commit.
Choosing a wall wood sheet?
Send the details and a photo. We reply with a written rate.