Call +92 308 4003555WhatsApp Us
ProductsWall Panels
PVC Wall PanelsFluted Wall Panels3D Wall PanelsWood PanelingStone Panels
FlooringCeilingAcoustic PanelsMDF & HPL Sheets
ZRK Sheet Price ListLasani Sheet Price
PVC SheetsLamination SheetsWall CladdingWall MouldingMedia WallWallpaperTilesUV SheetsKitchen CabinetsKitchen AppliancesCountertopsWardrobesBathroom FittingsSanitary WareBathroom VanityDoorsDoor LocksHardware & ToolsCurtainsBlindsLightingElectricalSmart HomeHome DecorSafes & Lockers CalculatorsConstruction Cost Calculator5 Marla House10 Marla House1 Kanal HousePVC Wall Panel CostFalse Ceiling Cost Areas We Serve
DHA LahoreBahria TownGulbergModel TownJohar TownLahore CanttWapda TownAskariIqbal TownGarden TownFaisal TownTownshipValencia TownRaiwind RoadLDA AvenueAllama Iqbal TownCavalry GroundMM Alam Road
CompanyServicesProjectsAbout UsBlogContact

Cutlery Holder Guide: Counter Stands, Table Caddies, Wall Racks and Drying Baskets, Materials, Sizes, Hygiene, Indicative Rates in Pakistan and Placement for Kitchen and Dining

A cutlery holder keeps spoons, forks and knives together on the counter, the table or the wall, and the right type depends on whether you want it for drying, serving or storage. Prices run from about PKR 200 for a simple plastic holder to PKR 4,000 for a stainless steel caddy. This page covers counter stands, table caddies, wall racks and drying baskets, materials, sizes, hygiene, indicative rates and placement. For drawer trays see drawer organizers, for napkins see napkin holders and for utensils see kitchen utensil stands.

Types of cutlery holder

  • Counter stand. A pot or compartment holder for daily use.
  • Table caddy. A portable holder with compartments for serving at the table.
  • Drying basket. A perforated basket that drains water by the sink.
  • Wall rack. Small holders on a rail, saving counter space.
Drying basket of cutlery sitting beside a sink with water dripping into the tray, daylight
Drying basket of cutlery sitting beside a sink with water dr

Indicative rates

These ranges show common retail figures.

TypeIndicative range
Plastic cutlery holderPKR 200 - 800
Stainless steel standPKR 500 - 2,500
Table caddy with compartmentsPKR 800 - 4,000
Drying basket with trayPKR 600 - 2,500
Wall rail with holdersPKR 1,200 - 5,000

Prices move with brand, model, size and stock. Use these ranges to judge a quote, then compare the exact model and what is included.

Materials

Stainless steel is hygienic and rust-resistant. Plastic is cheap but can stain. Bamboo and wood look warm but absorb moisture. Perforated baskets let water drain and air circulate. Choose steel for items that stay wet.

Wall-mounted rail with small pots holding spoons and forks above a counter, daylight
Wall-mounted rail with small pots holding spoons and forks a

Sizes

A holder for a family of four needs space for 12 to 20 pieces. Check the height, since tall holders suit table knives and short holders suit spoons and forks. Compartments keep types separate and make setting the table faster.

Hygiene

Wet cutlery in a closed holder can grow mould. Dry items before storing them, or use a draining basket. Wash holders weekly and replace any with rust or cracks. Keep knives with blades down in a safe holder, and out of children's reach.

Placement

Place the holder near the sink for drying, near the dining table for serving and near the hob for cooking spoons. A wall rack keeps the counter clear in a small kitchen. See kitchen organiser racks.

What to check before buying

  • Stability. Heavy base, no tipping.
  • Drainage. For wet cutlery.
  • Material. Rust-resistant.
  • Size. Fits your cutlery.

Before you decide

Count your cutlery and decide where it will be used. A simple steel stand near the sink and a table caddy for meals cover most homes. Choose easy-to-clean designs and avoid ones with seams where water gets trapped. Choose a holder with a wide base to avoid tipping with a full load of spoons. Replace worn holders promptly.

Frequently Asked Questions

A stand, caddy, basket or rack that keeps spoons, forks and knives together on the counter, table or wall. Ask for the specification in writing so you can compare quotes on the same basis. Check the warranty terms and who honours them before you pay.

A plastic holder is about PKR 200 to 800, a stainless steel stand about PKR 500 to 2,500 and a table caddy about PKR 800 to 4,000. Check the warranty terms and who honours them before you pay. Measure carefully and confirm sizes with the seller before ordering.

Stainless steel is hygienic and rust-resistant. Plastic is cheap but can stain, and wood absorbs moisture. Measure carefully and confirm sizes with the seller before ordering. Rates and stock change, so confirm the current position before you commit. If you are unsure, send a photo and the measurements and we will advise.

Dry cutlery before storing it, use a draining basket and wash the holder weekly. Rates and stock change, so confirm the current position before you commit. If you are unsure, send a photo and the measurements and we will advise. Ask for the specification in writing so you can compare quotes on the same basis.

Near the sink for drying, near the table for serving and near the hob for cooking spoons. If you are unsure, send a photo and the measurements and we will advise. Ask for the specification in writing so you can compare quotes on the same basis.

Yes, we supply across Pakistan. Share the quantity, the size or rating and the place of use on WhatsApp. You get a written rate with the exact model, what is included and the warranty, ready to compare with any other seller. Rates and stock change, so confirm the current position before you commit.

Choosing a cutlery holder?

Send the details and a photo. We reply with a written rate.