Call +92 308 4003555WhatsApp Us
ProductsWall Panels
PVC Wall PanelsFluted Wall Panels3D Wall PanelsWood PanelingStone Panels
FlooringCeilingAcoustic PanelsMDF & HPL Sheets
ZRK Sheet Price ListLasani Sheet Price
PVC SheetsLamination SheetsWall CladdingWall MouldingMedia WallWallpaperTilesUV SheetsKitchen CabinetsKitchen AppliancesCountertopsWardrobesBathroom FittingsSanitary WareBathroom VanityDoorsDoor LocksHardware & ToolsCurtainsBlindsLightingElectricalSmart HomeHome DecorSafes & Lockers CalculatorsConstruction Cost Calculator5 Marla House10 Marla House1 Kanal HousePVC Wall Panel CostFalse Ceiling Cost Areas We Serve
DHA LahoreBahria TownGulbergModel TownJohar TownLahore CanttWapda TownAskariIqbal TownGarden TownFaisal TownTownshipValencia TownRaiwind RoadLDA AvenueAllama Iqbal TownCavalry GroundMM Alam Road
CompanyServicesProjectsAbout UsBlogContact

Electric Hot Water Tap Guide: Instant Heating Taps for Kitchens and Basins, Wattage, Flow, Wiring, Safety, Scale, Installation, Indicative Rates and When It Suits Better Than a Geyser in Pakistan

An electric hot water tap has a small heater built into the tap itself, so you get hot water at the sink without a geyser or long pipes, and it suits basins, kitchens and offices. Prices run from about PKR 3,500 to PKR 12,000. This page covers instant heating taps, wattage, flow, wiring, safety, scale, installation, indicative rates and when it suits better than a geyser. For related pages see electric geyser prices, water heaters and basin taps.

How it works

Water passes a heating element inside the tap body and leaves warm when the tap opens. The heater is rated at 2,000 to 3,000 watts. Flow is low, around 1.5 to 3 litres per minute, to allow heating.

Underside of a heating tap with a cable and a plug connected to a wall socket, close-up
Underside of a heating tap with a cable and a plug connected

Indicative rates

These ranges show common retail figures.

ItemIndicative range
Basic electric heating tapPKR 3,500 - 6,000
Tap with digital displayPKR 5,500 - 9,000
Under-sink instant heaterPKR 6,000 - 14,000
ElectricianPKR 1,000 - 3,000

Prices move with brand, model, size and stock. Use these ranges to judge a quote, then compare the exact model and what is included.

Wattage and wiring

A 2,000 to 3,000 watt tap draws 9 to 14 amps, so use a dedicated circuit with a residual current device and proper cable and a socket rated for the load. Never use a thin extension cord.

Limescale clogged inside the outlet of an old heating tap, close-up
Limescale clogged inside the outlet of an old heating tap

Safety

Water and electricity need care. Choose a tap with an IP rating of IPX4 or higher, an earth connection and a residual current device. Do not use damaged cables. Have it fitted by an electrician. Gas and electrical work on a geyser must be done by licensed tradespeople, with proper ventilation and earthing.

Scale

Hard water scales the element and outlet, reducing flow and heating. Descale with vinegar regularly or fit a filter. A tap with a removable aerator is easier to clean.

When it suits

An electric hot water tap suits a basin far from the geyser, small kitchens, offices, shops and mosques where hot water is used in small amounts. For showers, baths and several outlets, a geyser is better.

Installation

It replaces the existing tap, connects to the cold water line and needs a power socket nearby. Check the hole size and spacing. Fit an isolation valve.

What to check before buying

  • IP rating. IPX4 or higher
  • Wattage. Circuit can carry it
  • Scale. Descaling plan
  • Warranty. Written

Heating tap or geyser

A heating tap is a low-cost local fix, while a geyser suits whole-bathroom needs. See electric geyser prices.

Before you decide

Check the wiring, the IP rating and your water hardness. An electric hot water tap gives quick warm water at the sink at low cost. Ask the seller for the wattage, IP rating and warranty in writing and keep the invoice with the model number.

Frequently Asked Questions

About PKR 3,500 to 9,000 for a tap and PKR 6,000 to 14,000 for an under-sink heater. Ask for the specification in writing so you can compare quotes on the same basis. Check the warranty terms and who honours them before you pay.

Typically 2,000 to 3,000 watts while running. Check the warranty terms and who honours them before you pay. Measure carefully and confirm sizes with the seller before ordering. Rates and stock change, so confirm the current position before you commit. If you are unsure, send a photo and the measurements and we will advise.

Yes if properly wired with an earth, a residual current device and a suitable IP rating. Measure carefully and confirm sizes with the seller before ordering. Rates and stock change, so confirm the current position before you commit. If you are unsure, send a photo and the measurements and we will advise.

No, flow is too low. Rates and stock change, so confirm the current position before you commit. If you are unsure, send a photo and the measurements and we will advise. Ask for the specification in writing so you can compare quotes on the same basis.

Descale regularly or fit a filter. If you are unsure, send a photo and the measurements and we will advise. Ask for the specification in writing so you can compare quotes on the same basis. Check the warranty terms and who honours them before you pay.

Send the quantity, the size or rating and a photo of the space. We reply with a written rate that names the model and the warranty, and lists what is and is not included, so the comparison with other sellers is fair.

Considering a heating tap?

Send the details and a photo. We reply with a written rate.