Wall Switches: Modular and Metal Plate Types, One-Way and Two-Way Wiring, 6 A and 10 A Ratings, Dimmers and Regulators
Wall switches control lights, fans and sockets, and the right choice depends on the wiring, the load and the look. Modular switches in a plate give a clean finish, one-way switches control a light from one place and two-way switches control it from two places, such as the two ends of a corridor. Dimmers and fan regulators need their own ratings. This guide covers types, ratings, wiring, fitting and indicative prices. It sits under switches and sockets.
Types of wall switch
Modular plates, metal plates and key-style switches are common.
One-way and two-way
One-way switches control a light from one place, and two-way switches from two places. Two-way needs the right wiring.
Ratings and loads
Use 6 A switches for lights and fans and 10 A or 16 A for heavy loads. Match the cable and the breaker.
Dimmers and regulators
Use a dimmer that suits LED lights and a regulator that suits the fan. See LED bulb watt guide.
Fitting
Fit at about 4 feet from the floor, away from water, with a licensed electrician.
Indicative price ranges
Prices depend on brand and series.
| Item | Indicative range |
|---|---|
| Switch and socket panel, 7 switches plus socket | From about PKR 1,600 |
| Modular wall socket | From about PKR 280 |
Indicative market ranges. Prices change with brand, model, size and stock.
How we quote
Send the room size, a sketch or photo and the finish you like. We confirm what we can supply and reply with a written rate that lists every item. Before you order, confirm the exact size or model, ask for the specification and warranty in writing, and compare totals including fitting and delivery rather than the item price alone. To get a close first estimate, clear the area, mark sockets, switches and pipe positions, note the ceiling height and photograph the space from two corners.
| Item | Unit | Scope | Supply | Rate |
|---|---|---|---|---|
| Wall switches, by series | Per piece or per set | Material and hardware, fitting quoted separately | Supply across Pakistan | Imported sockets PKR 3,900 – 12,500 each |
| Boxes and fixing | As needed | Material and hardware, fitting quoted separately | Supply across Pakistan | PKR 80 – 400 |
Frequently Asked Questions
A switch that controls one light from two places, such as both ends of a corridor or a staircase. Ask for the specification in writing so you can compare quotes on the same basis. Check the warranty terms and who honours them before you pay.
6 A for lights and fans and 10 or 16 A for heavy loads, with matching cable and breaker. Check the warranty terms and who honours them before you pay. Measure carefully and confirm sizes with the supplier before ordering.
Use a dimmer made for LED loads and check the minimum load. Otherwise the lights may flicker. Measure carefully and confirm sizes with the supplier before ordering. If in doubt, send a photo and the measurements and we will advise.
Indicative ranges are from about PKR 280 per modular socket or switch module and from about PKR 1,600 for a 7-switch plus socket panel. If in doubt, send a photo and the measurements and we will advise.
Send the quantity and the series on WhatsApp. We confirm what we can supply and reply with a written rate. If in doubt, send a photo and the measurements and we will advise. Ask for the specification in writing so you can compare quotes on the same basis.
Send the room size, the items you need and a photo of the space on WhatsApp. We confirm what we can supply and reply with a written rate that lists every item with its model and quantity, so you can compare quotes from different suppliers on the same scope.
Choosing wall switches?
Send the room size and a photo. We reply with a written rate.