Main Door Handle Guide: Pull Handles, Handlesets and Levers for Front Doors, Length and Width, Material and Weather, Fixing Through the Door, Security Pairing, Indicative Rates and Fitting Tips in Pakistan
A main door handle gets daily use and weather, so it should be solid, easy to grip and matched to the lock that secures the door. Pull handles suit wide or double doors, while handlesets with lever suit single doors. Prices run from about PKR 2,500 to PKR 30,000. This page covers pull handles, handlesets and levers, length and width, material and weather, fixing through the door, security pairing, rates and fitting tips. For related pages see main door locks, door handle design and mortise lock.
Pull handles, handlesets and levers
Pull handles are fixed grips, often paired with a separate lock, and suit wide, double and glass doors. Handlesets combine a lever and lock for single doors. Levers alone work with a mortise lock.
Indicative rates
These ranges show common retail figures.
| Item | Indicative range |
|---|---|
| Basic pull handle pair | PKR 2,500 - 8,000 |
| Stainless steel bar pull, 600 mm to 1 m | PKR 5,000 - 20,000 |
| Brass or designer pull | PKR 10,000 - 30,000 |
| Lever and mortise lock set | PKR 4,000 - 15,000 |
| Fitting, per door | PKR 800 - 3,000 |
Prices move with brand, model, size and stock. Use these ranges to judge a quote, then compare the exact model and what is included.
Length and width
Handle length should suit the door width: 300 to 600 mm for single doors and 600 mm to 1 m or more for double and oversized doors. Too small a handle looks lost on a big door.
Material and weather
Stainless steel 304 resists rust, solid brass ages gracefully and powder-coated steel needs good coatings. Cheap plated parts peel in sun and rain. Choose solid or marine-grade parts for exposed doors.
Fixing through the door
Back-to-back fixing with long bolts through the door is strongest, and surface screws loosen over time. Use bolts of the right length and washers, and tighten evenly.
Security pairing
A handle does not secure a door, the lock does. Pair with a good mortise or multi-point lock and a strong frame. See main door locks.
Fitting tips
Mark positions carefully, drill straight and keep handles aligned with locks. Fitting should be done by a trained locksmith or carpenter, and the door, frame and hinges checked for fit and strength first.
Before you decide
Size the handle to the door, choose weather-proof material and fix it through the door. Compare at least two quotes on the same specification, keep the invoice and warranty card, ask for the model name and material in writing and test the product on your own door or in your own room before paying in full. Keep a spare key, card or code record in a safe place, and ask the seller what happens if the item fails within the warranty period. Photographs of the delivered item and its packaging make any claim much simpler later. Prices change with exchange rates and stock, so confirm the current figure before you decide.
Frequently Asked Questions
A solid pull handle or handleset in stainless steel or brass, sized to the door. Ask for the specification in writing so you can compare quotes on the same basis. Check the warranty terms and who honours them before you pay. Measure carefully and confirm sizes with the seller before ordering.
Indicative retail rates run from about PKR 2,500 to 30,000 depending on size and material. Check the warranty terms and who honours them before you pay. Measure carefully and confirm sizes with the seller before ordering. Rates and stock change, so confirm the current position before you commit.
300 to 600 mm for single doors, more for double doors. Measure carefully and confirm sizes with the seller before ordering. Rates and stock change, so confirm the current position before you commit. If you are unsure, send a photo and the measurements and we will advise.
No, the lock and frame do. Rates and stock change, so confirm the current position before you commit. If you are unsure, send a photo and the measurements and we will advise. Ask for the specification in writing so you can compare quotes on the same basis.
Through the door with long bolts. If you are unsure, send a photo and the measurements and we will advise. Ask for the specification in writing so you can compare quotes on the same basis. Check the warranty terms and who honours them before you pay.
Message us on WhatsApp with what you need and where it will be used. We check what we can supply and send a written rate showing the model, quantity, warranty and delivery, so you can judge it against other offers. Rates and stock change, so confirm the current position before you commit.
Choosing a main door handle?
Send the details and a photo. We reply with a written rate.