Bidet Shower Guide: Muslim Shower Sets, Brass and Steel Heads, Hose Length, Angle Valves, Water Pressure, Fitting Steps, Leak Fixes and Indicative Rates in Pakistan
A bidet shower, called a muslim shower in Pakistan, is a small hand spray beside the toilet used for washing, and it is standard in Pakistani bathrooms. Prices run from about PKR 600 for a basic set to PKR 4,500 for a heavy brass set. This page covers muslim shower sets, brass and steel heads, hose length, angle valves, water pressure, fitting steps, leak fixes and rates. For other showers see muslim showers, shower set prices and bathroom commodes.
What it includes
A standard set has a spray head with a trigger, a flexible hose, usually 1 to 1.5 metres, a wall holder and an angle valve or tee connector. Some sets include a wall elbow and a mixer for hot and cold. Check what is in the box.
Indicative rates
These ranges show common retail figures.
| Item | Indicative range |
|---|---|
| Basic plastic muslim shower set | PKR 600 - 1,000 |
| Chrome-plated set with braided hose | PKR 1,000 - 1,500 |
| Stainless steel SUS304 set | About PKR 1,450 - 2,500 |
| Heavy brass set | PKR 2,500 - 4,500 |
| Angle valve, brass | PKR 400 - 1,200 |
| Plumber, fitting | PKR 500 - 1,200 |
Prices move with brand, model, size and stock. Use these ranges to judge a quote, then compare the exact model and what is included.
Head, hose and valve quality
A metal head with a smooth trigger lasts longer than plastic. A braided stainless hose resists kinks and bursts, while cheap PVC hoses crack. A brass angle valve with a ceramic or quality seat avoids leaks. Check the weight of each part.
Water pressure
Bidet sprays need moderate pressure. If the pressure is high, an angle valve lets you reduce it. If it is low, as with rooftop tanks, a pump may help. A spray that is too strong is uncomfortable, so choose a head with pressure control.
Fitting steps
- Close the supply. At the angle valve or main.
- Fit the angle valve. With PTFE tape on the thread.
- Connect the hose. To the valve and the head.
- Fix the holder. Within easy reach, on a solid wall.
- Test. Open slowly and check every joint.
Leak fixes
- Leak at the hose. Replace the rubber washer or hose.
- Dripping head. Worn trigger seal, replace the head.
- Valve leak. Retighten or replace the valve.
- Weak spray. Clean the nozzle with vinegar.
Hygiene and care
Hang the head in its holder after use, wipe it clean and descale the nozzle occasionally. Replace the hose every few years. Shut off the angle valve when you travel, to avoid a burst hose flooding the bathroom. Fixed plumbing should be done by a licensed plumber.
What to check before buying
- Metal head and braided hose. For durability.
- Thread size. Half-inch standard.
- Trigger feel. Smooth and sealed.
- Warranty and spares. Hose and head.
Mixers and warm water
Many homes now fit a mixer so the spray can use warm water in winter. This needs a hot supply and a proper mixer valve, and the pressure must be balanced. See shower mixers for options.
Before you decide
Decide the position beside the toilet, choose a metal head with a braided hose and fit an angle valve. A good bidet shower is a small purchase that you will use many times a day, so avoid the cheapest plastic sets.
Frequently Asked Questions
A small hand spray beside the toilet for washing, called a muslim shower in Pakistan. Ask for the specification in writing so you can compare quotes on the same basis. Check the warranty terms and who honours them before you pay. Measure carefully and confirm sizes with the seller before ordering.
A basic set is about PKR 600 to 1,000, a chrome set with braided hose about PKR 1,000 to 1,500, stainless steel about PKR 1,450 to 2,500 and heavy brass about PKR 2,500 to 4,500. Check the warranty terms and who honours them before you pay.
About 1 to 1.5 metres, long enough to reach comfortably without dragging. Measure carefully and confirm sizes with the seller before ordering. Rates and stock change, so confirm the current position before you commit. If you are unsure, send a photo and the measurements and we will advise.
Replace the hose washer or hose, tighten the valve or replace a worn head. Rates and stock change, so confirm the current position before you commit. If you are unsure, send a photo and the measurements and we will advise. Ask for the specification in writing so you can compare quotes on the same basis.
Yes. It lets you adjust pressure and shut off the water for repairs. If you are unsure, send a photo and the measurements and we will advise. Ask for the specification in writing so you can compare quotes on the same basis.
Send the details and a photo on WhatsApp. We confirm what we can supply and reply with a written rate that lists the model, size, warranty and delivery, so you can compare it with other quotes on the same scope. Rates and stock change, so confirm the current position before you commit.
Choosing a bidet shower?
Send the details and a photo. We reply with a written rate.