Engineered Hardwood Flooring in Lahore
Genuine real wood veneer over a dimensionally stable plywood core. The warmth and character of solid hardwood with better resistance to Lahore's humidity — at a lower price.
Real Wood Floors — Engineered for Pakistan's Climate
Engineered hardwood flooring gives you everything you love about solid hardwood — the grain, the warmth, the prestige — with significantly better dimensional stability. The top layer is a genuine wood veneer (2–6mm thick) bonded over a cross-ply plywood core that resists cupping and gapping caused by Lahore's seasonal humidity swings.
At Finishes.pk we source engineered hardwood boards in oak, American walnut, teak, acacia and ash from European and South-East Asian mills. Our range covers standard 3mm veneer for general use and premium 6mm veneer wide-plank boards for luxury villa and penthouse projects.
Engineered hardwood can be installed as a floating floor or glue-down depending on your subfloor. It is suitable for ground floors and upper floors alike — unlike solid wood which cannot go below grade. For wet areas, we recommend our waterproof SPC flooring instead.
Engineered hardwood price in Lahore ranges from PKR 280 to PKR 600 per sqft depending on species, veneer thickness and board width. Installation costs PKR 80–120 per sqft including adhesive or underpad.
Specifications & Price Guide
Engineered Hardwood Species Available in Lahore
European Oak
The most popular species worldwide. Clean grain, warm honey tones and excellent hardness (Janka 1290). Available in natural, smoked, whitewashed and grey finishes.
American Walnut
Rich chocolate-brown tones with dramatic grain character. A luxury choice for master bedrooms, studies and executive offices in Lahore's premium developments.
Teak
High natural oil content makes teak exceptionally water-resistant among hardwoods. Golden-brown with interlocked grain — a classic choice for traditional Pakistani interiors.
Acacia
Extremely hard (Janka 2300+) with wild, varied grain and warm caramel tones. Ideal for high-traffic areas in villas, guest lounges and corridors.
Ash
Light blonde tones with straight grain. Pairs beautifully with Scandinavian and minimalist interior styles gaining popularity in Lahore's newer residential projects.
Herringbone Engineered
Real oak or walnut veneer boards cut and installed in a herringbone pattern. Pre-finished for easier fitting — the statement floor for dining rooms and entrance halls.
Frequently Asked Questions — Engineered Hardwood Lahore
What is engineered hardwood flooring?
Engineered hardwood flooring consists of a real wood veneer (2–6mm thick) bonded over a multi-ply plywood core. The construction makes it more dimensionally stable than solid wood while retaining the genuine hardwood appearance and feel underfoot.
What is engineered hardwood price in Lahore?
Engineered hardwood flooring in Lahore costs PKR 280–380 per sqft for standard 3mm veneer oak and ash boards. Premium 6mm veneer wide-plank walnut and teak boards cost PKR 450–600 per sqft. Installation adds PKR 80–120 per sqft.
Can engineered hardwood be sanded and refinished?
Yes, once. Boards with a 4mm or thicker veneer layer can be lightly sanded and refinished one time, extending the floor's life significantly. Boards with a 2–3mm veneer are not recommended for sanding as you risk cutting through to the plywood core.
Engineered hardwood vs solid wood — which is better for Lahore?
Engineered hardwood is better suited to Lahore because the multi-ply core resists seasonal humidity fluctuations that cause solid wood to cup and gap. It is also less expensive, can go on all floor levels (including upper floors), and gives an identical surface appearance to solid hardwood.
Order Engineered Hardwood Flooring in Lahore
Free home visit for measurement & species selection. Expert installation included across Lahore.